snmp error

elasys · Post by **elasys** » Mon Nov 22, 2004 7:32 am

hi everybody
I use cacti-0.8.6b
cactid-0.8.6c
net-snmp-5.1.2-1.win32.exe
active perl 5
mysql
rrdtool
and IIS

but in device page was wrote snmp error under device name
and also all the graph is not generated and the pictures not found message apear
I run all of them in debug mode everything is normal, but there is not any rrd enerated in rra folder but in log file they are in used !!!!!!!
all the permission for rra and log file is correct
also when I run php pooler.exe this messages apear

Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
C:\net-snmp\etc\snmp/snmp.conf: line 2: Warning: Unknown token: persistentDir.
C:\net-snmp\etc\snmp/snmp.conf: line 3: Warning: Unknown token:

Status: 404
Content-type: text/html
X-Powered-By: PHP/4.3.9

plz help me
thanx in advance[/quote]

Post by **rony** » Mon Nov 22, 2004 9:18 am

http://forums.cacti.net/viewtopic.php?t=5555

Please refer to this post.

elasys · Post by **elasys** » Sat Nov 27, 2004 5:15 am

thanx a lot

my problem was solved,
but new problem is that I want to use cacti from another station but just when I try http://localhost/cacti/ on cacti server it replies

and when I try to use http://serverIPaddress/cacti/ on cacti server or another station error 505 (internal server error) occure

what is the reason????

thanx in advance

Post by **TheWitness** » Tue Nov 30, 2004 9:13 pm

Not a clue

TheWitness

Post by **rony** » Tue Nov 30, 2004 9:34 pm

If I had to guess, the problem is with apache and you need to review that there isn't a virtual hosting directives setup.

Other than that, no clue.

Guest · Post by **Guest** » Fri Jan 07, 2005 9:20 am

I corrected the spelling of "MIBDIRS" and if I open a command prompt (Windows 2003 Web) and do "dir %MIBDIRS%" I see all the MIBs, but I'm still getting the "Cannot find module" errors. If there something I need to do to reload Cacti?

I'm using Net-SNMP 5.2.0-1-rc1.

jogar · Post by **jogar** » Fri Jan 07, 2005 9:22 am

Whoops. Guest==me

pamram · Post by **pamram** » Fri Jan 07, 2005 12:15 pm

Here's your solution:

on the same drive where you installed php, let's say D:\PHP, create a folder called D:\usr\mibs an make sure the IIS user has rights to it. That'll do !

jogar · Post by **jogar** » Fri Jan 07, 2005 1:02 pm

Thanks Pam,
I tried that, no effect--then went back and as a sanity check made the MIBDIRS directory Everyone--Full Control (!!!), but that didn't work either!

Is there a way to get any more verbose results from Cacti for this "Cannot find module (IP-MIB)" stuff??

Post by **TheWitness** » Fri Jan 07, 2005 4:34 pm

Do you have net-snmp installed? If so, goto the Net-SNMP directory and edit the snmp.conf file. There will be a MIBDIRS path in that file. Please insure that the value there is relevant. In addition, you should publish more information, where you see the error, etc.

TheWitness

tdl · Post by **tdl** » Sat Feb 12, 2005 4:31 am

2003 server - iis

after install (following instructions and changes to path statements)

I run:
c:\php\php.exe c:\inetpub\cacti\poller.php
in a command promt.
(I've run it at the run command as well but...)

I get the following:

C:\Documents and Settings\Administrator>c:\php\php.exe c:\inetpub\cacti\poller.p
hp
Cannot find module (IP-MIB): At line 0 in (none)
Cannot find module (IF-MIB): At line 0 in (none)
Cannot find module (TCP-MIB): At line 0 in (none)
Cannot find module (UDP-MIB): At line 0 in (none)
Cannot find module (SNMPv2-MIB): At line 0 in (none)
Cannot find module (SNMPv2-SMI): At line 0 in (none)
Cannot find module (UCD-SNMP-MIB): At line 0 in (none)
Cannot find module (UCD-DEMO-MIB): At line 0 in (none)
Cannot find module (SNMP-TARGET-MIB): At line 0 in (none)
Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 0 in (none)
Cannot find module (SNMP-COMMUNITY-MIB): At line 0 in (none)
Cannot find module (UCD-DLMOD-MIB): At line 0 in (none)
Cannot find module (SNMP-FRAMEWORK-MIB): At line 0 in (none)
Cannot find module (SNMP-MPD-MIB): At line 0 in (none)
Cannot find module (SNMP-USER-BASED-SM-MIB): At line 0 in (none)
Cannot find module (SNMP-NOTIFICATION-MIB): At line 0 in (none)
Cannot find module (SNMPv2-TM): At line 0 in (none)
There are no items in your poller cache or polling is disabled. Make sure you have at least one data source created. If you do, go to 'Utilities', and select 'Clear Poller Cache'.

my path is:
C:\Documents and Settings\Administrator>path
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Adaptec Shared\System;MIBDIRS=C:\net-snmp\share\snmp\mibs;C:\php\extr
as\mibs;PHPRC=C:\php;C:\mysql\bin;C:\net-snmp\bin

My net-snmp conf file contents are:

mibdirs C:/net-snmp/share/snmp/mibs
persistentDir C:/net-snmp/snmp/persist
tempFilePattern C:/net-snmp/temp/snmpdXXXXXX

Per suggestions above I've put in both directories .. with no luck.

Any suggestions other than moving to Linux?

Post by **TheWitness** » Sat Feb 12, 2005 7:48 am

What is your version of PHP? Have you tried the environment variable MIBDIRS?

TheWitness

tdl · Post by **tdl** » Sat Feb 12, 2005 12:29 pm

path = to the environmental variable yes?
Path just shows you what you have entered.

MIBDIRS = text in my first message
Even tried using net-snmp's directory and php's in the same line seperated by ; Makes no difference.

Perl = Active Perl 5.8.6.811-MSWin32 (for grins)
php = 5.0.3-Win32
net-snmp = 5.2.1-1.win32
rrd = 1.0.49-win32
cacti = cacti-0.8.6c and cactid-0.8.6d
mysql = 4.1.9-win32
IIS = 6.0
2003 server latest patches

I know it's something I'm missing since there are others running on this platform. Guessing permissions of some sort since the netsnmp runs fine.
The install of 2003 is virgin save the MS critical updates so no applications other than the ones listed above (plus virus prot).

Post by **TheWitness** » Sat Feb 12, 2005 1:41 pm

Looking more closely, the following is FOOBAR:

C:\Documents and Settings\Administrator>path
PATH=C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Common Files\Adaptec Shared\System;MIBDIRS=C:\net-snmp\share\snmp\mibs;C:\php\extr
as\mibs;PHPRC=C:\php;C:\mysql\bin;C:\net-snmp\bin

You do not place MIBDIRS and PHPRC in the path statement.

TheWitness

tdl · Post by **tdl** » Sat Feb 12, 2005 8:31 pm

I'll take them out .. but the instructions said to put them in

Chapter 3. Installing Under Windows
Install PHP
Extract the PHP zip file to c:\ and rename the install directory (ie. 'php5.0.1') to 'php'.

If using PHP 4, move the files in c:\php\dlls to c:\php.

Add the following to your Windows PATH environement variable c:\php. The Windows path can be accessed via the Control Panel at: 'System', 'Advanced', 'Environment'.

*************************************************
Add the following three environment variables to your system using the procedure above: MIBS=ALL, MIBSDIR=c:\php\mibs, and PHPRC=c:\php.
*************************************************
(MIBSDIR CHANGED TO MIBDIRS per forum)

Setting these in the environement variable .. places them in the path.

I'll give anything a shot at this point.

Cacti

snmp error

snmp error

please help

Who is online