No data on graphs

Post support questions that directly relate to Linux/Unix operating systems.

Moderators: Developers, Moderators

Post Reply
younko
Posts: 1
Joined: Thu Mar 22, 2012 4:00 pm

No data on graphs

Post by younko »

I cannot get any data on the graphs anywhere in cacti. The graphs are generated but there is no data on them. This is running on Ubuntu 10.0. The Poller is running (i believe without error). I cannot figure out what's up. The log is below.


03/22/2012 04:59:12 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363552 --end=1332449952 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/21 16\:59\:12 To 2012/03/22 16\:59\:12\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:59:12 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363552 --end=1332449952 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/21 16\:59\:12 To 2012/03/22 16\:59\:12\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:56:53 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363413 --end=1332449813 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/21 16\:56\:53 To 2012/03/22 16\:56\:53\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:56:53 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363413 --end=1332449813 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/21 16\:56\:53 To 2012/03/22 16\:56\:53\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:56:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363411 --end=1332449811 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/21 16\:56\:51 To 2012/03/22 16\:56\:51\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:56:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363411 --end=1332449811 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/21 16\:56\:51 To 2012/03/22 16\:56\:51\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:55:02 PM - SYSTEM STATS: Time:1.2121 Method:spine Processes:1 Threads:1 Hosts:2 HostsPerProcess:2 DataSources:3 RRDsProcessed:2
03/22/2012 04:55:02 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_traffic_in_27.rrd --template traffic_out:traffic_in 1332449701:204016046444:761318801743
03/22/2012 04:55:02 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd --template 5min_cpu 1332449701:9
03/22/2012 04:55:01 PM - SPINE: Poller[0] Time: 0.1228 s, Threads: 1, Hosts: 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: MYSQL Free & Close Completed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Allocated Variable Memory Freed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: PHP Script Server Pipes Closed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Thread Cleanup Complete
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] DS[27] SNMP: v2: 192.168.254.1, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.1, value: 761318801743
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] DS[27] SNMP: v2: 192.168.254.1, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.1, value: 204016046444
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] DS[26] SNMP: v2: 192.168.254.1, dsname: 5min_cpu, oid: .1.3.6.1.4.1.9.9.109.1.1.1.1.5.1, value: 9
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] NOTE: There are '3' Polling Items for this Host
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] RECACHE: Processing 1 items in the auto reindex cache for '192.168.254.1'
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[6] SNMP Result: Host responded to SNMP
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[0] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Initial Value of Active Threads is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] SPINE: Initializing PHP Script Server(s)
03/22/2012 04:55:01 PM - SPINE: Poller[0] Time: 0.1274 s, Threads: 1, Hosts: 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: MYSQL Free & Close Completed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Allocated Variable Memory Freed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: PHP Script Server Pipes Closed
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Thread Cleanup Complete
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] Host[0] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Initial Value of Active Threads is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] SPINE: Initializing PHP Script Server(s)
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Issues with SNMP Header Version information, assuming old version of Net-SNMP.
03/22/2012 04:55:01 PM - SPINE: Poller[0] SPINE: Initializing Net-SNMP API
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: MySQL is Thread Safe!
03/22/2012 04:55:01 PM - SPINE: Poller[0] Version 0.8.7e starting
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Maximum SNMP OID Get Size is 10
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The PHP Script Server is Not Required
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: StartHost='6', EndHost='6', TotalPHPScripts='0'
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The number of php script servers to run is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The script timeout is 25
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The number of concurrent processes is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The polling interval is 60 seconds
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The threads variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_pstats variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The boost_redirect variable is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_pwarn variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_perror variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The snmp_retries variable is 3
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_timeout variable is 400
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_retries variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_method variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_failure_count variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_recovery_count variable is 3
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The availability_method variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The path_php variable is /usr/bin/php
03/22/2012 04:55:01 PM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: /usr/sbin/spine, ARGS: 6 6]
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: Issues with SNMP Header Version information, assuming old version of Net-SNMP.
03/22/2012 04:55:01 PM - SPINE: Poller[0] SPINE: Initializing Net-SNMP API
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: MySQL is Thread Safe!
03/22/2012 04:55:01 PM - SPINE: Poller[0] Version 0.8.7e starting
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The Maximum SNMP OID Get Size is 10
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The PHP Script Server is Not Required
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: StartHost='0', EndHost='0', TotalPHPScripts='0'
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The number of php script servers to run is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The script timeout is 25
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The number of concurrent processes is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The polling interval is 60 seconds
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The threads variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_pstats variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The boost_redirect variable is 0
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_pwarn variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The log_perror variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The snmp_retries variable is 3
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_timeout variable is 400
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_retries variable is 1
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_method variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_failure_count variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The ping_recovery_count variable is 3
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The availability_method variable is 2
03/22/2012 04:55:01 PM - SPINE: Poller[0] DEBUG: The path_php variable is /usr/bin/php
03/22/2012 04:55:01 PM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: /usr/sbin/spine, ARGS: 0 0]
03/22/2012 04:55:01 PM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
03/22/2012 04:55:01 PM - POLLER: Poller[0] NOTE: Poller Int: '60', Cron Int: '60', Time Since Last: '300', Max Runtime '58', Poller Runs: '1'
03/22/2012 04:53:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363231 --end=1332449631 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/21 16\:53\:51 To 2012/03/22 16\:53\:51\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:53:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363231 --end=1332449631 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/21 16\:53\:51 To 2012/03/22 16\:53\:51\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:53:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363231 --end=1332449631 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/21 16\:53\:51 To 2012/03/22 16\:53\:51\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:53:51 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332363231 --end=1332449631 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/21 16\:53\:51 To 2012/03/22 16\:53\:51\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:53:12 PM - AUTH LOGIN: User 'admin' Authenticated
03/22/2012 04:52:50 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406370 --end=1332449570 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:52\:50 To 2012/03/22 16\:52\:50\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:52:50 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406370 --end=1332449570 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/22 04\:52\:50 To 2012/03/22 16\:52\:50\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:52:45 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406364 --end=1332449564 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:52\:44 To 2012/03/22 16\:52\:44\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:52:45 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406364 --end=1332449564 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/22 04\:52\:44 To 2012/03/22 16\:52\:44\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:52:45 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406364 --end=1332449564 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/22 04\:52\:44 To 2012/03/22 16\:52\:44\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:52:44 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406364 --end=1332449564 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:52\:44 To 2012/03/22 16\:52\:44\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:50:54 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406254 --end=1332449454 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/22 04\:50\:54 To 2012/03/22 16\:50\:54\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:50:54 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406254 --end=1332449454 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:50\:54 To 2012/03/22 16\:50\:54\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:50:54 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406254 --end=1332449454 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:50\:54 To 2012/03/22 16\:50\:54\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:50:02 PM - SYSTEM STATS: Time:1.2121 Method:spine Processes:1 Threads:1 Hosts:2 HostsPerProcess:2 DataSources:3 RRDsProcessed:2
03/22/2012 04:50:02 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_traffic_in_27.rrd --template traffic_out:traffic_in 1332449401:204014207812:761303765770
03/22/2012 04:50:02 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd --template 5min_cpu 1332449401:6
03/22/2012 04:50:01 PM - SPINE: Poller[0] Time: 0.1218 s, Threads: 1, Hosts: 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: MYSQL Free & Close Completed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Allocated Variable Memory Freed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: PHP Script Server Pipes Closed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Thread Cleanup Complete
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] DS[27] SNMP: v2: 192.168.254.1, dsname: traffic_in, oid: .1.3.6.1.2.1.31.1.1.1.6.1, value: 761303765770
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] DS[27] SNMP: v2: 192.168.254.1, dsname: traffic_out, oid: .1.3.6.1.2.1.31.1.1.1.10.1, value: 204014207812
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] DS[26] SNMP: v2: 192.168.254.1, dsname: 5min_cpu, oid: .1.3.6.1.4.1.9.9.109.1.1.1.1.5.1, value: 6
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] NOTE: There are '3' Polling Items for this Host
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] RECACHE: Processing 1 items in the auto reindex cache for '192.168.254.1'
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[6] SNMP Result: Host responded to SNMP
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[0] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Initial Value of Active Threads is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] SPINE: Initializing PHP Script Server(s)
03/22/2012 04:50:01 PM - SPINE: Poller[0] Time: 0.1180 s, Threads: 1, Hosts: 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: MYSQL Free & Close Completed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Allocated Variable Memory Freed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: PHP Script Server Pipes Closed
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Thread Cleanup Complete
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Issues with SNMP Header Version information, assuming old version of Net-SNMP.
03/22/2012 04:50:01 PM - SPINE: Poller[0] SPINE: Initializing Net-SNMP API
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: MySQL is Thread Safe!
03/22/2012 04:50:01 PM - SPINE: Poller[0] Version 0.8.7e starting
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Maximum SNMP OID Get Size is 10
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The PHP Script Server is Not Required
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: StartHost='6', EndHost='6', TotalPHPScripts='0'
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The number of php script servers to run is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The script timeout is 25
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The number of concurrent processes is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] Host[0] DEBUG: HOST COMPLETE: About to Exit Host Polling Thread Function
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The polling interval is 60 seconds
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The threads variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_pstats variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The boost_redirect variable is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_pwarn variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_perror variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The snmp_retries variable is 3
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_timeout variable is 400
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_retries variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_method variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_failure_count variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_recovery_count variable is 3
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: In Poller, About to Start Polling of Host
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The availability_method variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Value of Active Threads is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Valid Thread to be Created
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The path_php variable is /usr/bin/php
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Initial Value of Active Threads is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] SPINE: Initializing PHP Script Server(s)
03/22/2012 04:50:01 PM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: /usr/sbin/spine, ARGS: 6 6]
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: Issues with SNMP Header Version information, assuming old version of Net-SNMP.
03/22/2012 04:50:01 PM - SPINE: Poller[0] SPINE: Initializing Net-SNMP API
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: MySQL is Thread Safe!
03/22/2012 04:50:01 PM - SPINE: Poller[0] Version 0.8.7e starting
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The Maximum SNMP OID Get Size is 10
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The PHP Script Server is Not Required
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: StartHost='0', EndHost='0', TotalPHPScripts='0'
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The number of php script servers to run is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The script timeout is 25
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The number of concurrent processes is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The polling interval is 60 seconds
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The threads variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_pstats variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The boost_redirect variable is 0
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_pwarn variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The log_perror variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The snmp_retries variable is 3
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_timeout variable is 400
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_retries variable is 1
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_method variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_failure_count variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The ping_recovery_count variable is 3
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The availability_method variable is 2
03/22/2012 04:50:01 PM - SPINE: Poller[0] DEBUG: The path_php variable is /usr/bin/php
03/22/2012 04:50:01 PM - POLLER: Poller[0] DEBUG: About to Spawn a Remote Process [CMD: /usr/sbin/spine, ARGS: 0 0]
03/22/2012 04:50:01 PM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
03/22/2012 04:50:01 PM - POLLER: Poller[0] NOTE: Poller Int: '60', Cron Int: '60', Time Since Last: '300', Max Runtime '58', Poller Runs: '1'
03/22/2012 04:48:04 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406084 --end=1332449284 --title='IST-2821 - CPU Usage' --rigid --base=1000 --height=120 --width=500 --alt-autoscale-max --lower-limit=0 COMMENT:"From 2012/03/22 04\:48\:04 To 2012/03/22 16\:48\:04\c" COMMENT:" \n" --vertical-label='percent' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd":5min_cpu:AVERAGE AREA:a#ED5394FF:"CPU Usage" GPRINT:a:LAST:"Current\:%8.0lf" GPRINT:a:AVERAGE:"Average\:%8.0lf" GPRINT:a:MAX:"Maximum\:%8.0lf"
03/22/2012 04:48:04 PM - WEBLOG: Poller[0] CACTI2RRD: /usr/bin/rrdtool graph - --imgformat=PNG --start=1332406084 --end=1332449284 --title='IST-2821 - Traffic - Gi0/0' --rigid --base=1000 --height=120 --width=600 --alt-autoscale COMMENT:"From 2012/03/22 04\:48\:04 To 2012/03/22 16\:48\:04\c" COMMENT:" \n" --vertical-label='bits per second' --slope-mode --font TITLE:12: --font AXIS:8: --font LEGEND:10: --font UNIT:8: DEF:a="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:AVERAGE DEF:b="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_in:MAX DEF:c="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:AVERAGE DEF:d="/var/lib/cacti/rra/ist-2821_traffic_in_27.rrd":traffic_out:MAX CDEF:cdefa=a,8,* CDEF:cdefe=b,8,* CDEF:cdeff=c,8,*,-1,* CDEF:cdefg=c,8,* CDEF:cdefj=d,8,*,-1,* AREA:cdefa#00FF0099:"Inbound" GPRINT:cdefa:LAST:" Current\:%8.2lf %s" GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s" LINE1:cdefe#005D57FF:"Peak Usage\n" AREA:cdeff#00A0FF99:"Outbound" GPRINT:cdefg:LAST:" Current\:%8.2lf %s" GPRINT:cdefg:AVERAGE:"Average\:%8.2lf %s" GPRINT:cdefg:MAX:"Maximum\:%8.2lf %s" LINE1:cdefj#0000AAFF:"Peak Usage\n"
03/22/2012 04:45:03 PM - SYSTEM STATS: Time:1.2121 Method:spine Processes:1 Threads:1 Hosts:2 HostsPerProcess:2 DataSources:3 RRDsProcessed:2
03/22/2012 04:45:03 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_traffic_in_27.rrd --template traffic_out:traffic_in 1332449102:204011617422:761287930464
03/22/2012 04:45:03 PM - POLLER: Poller[0] CACTI2RRD: /usr/bin/rrdtool update /var/lib/cacti/rra/ist-2821_5min_cpu_26.rrd --template 5min_cpu 1332449102:8
Top
noname
Cacti Guru User
Posts: 1566
Joined: Thu Aug 05, 2010 2:04 am
Location: Japan

Re: No data on graphs

Post by noname »

younko wrote: 03/22/2012 04:55:01 PM - POLLER: Poller[0] WARNING: Cron is out of sync with the Poller Interval! The Poller Interval is '60' seconds, with a maximum of a '300' second Cron, but 300 seconds have passed since the last poll!
03/22/2012 04:55:01 PM - POLLER: Poller[0] NOTE: Poller Int: '60', Cron Int: '60', Time Since Last: '300', Max Runtime '58', Poller Runs: '1'
Probably you configured
- Poller Interval = "Every Minute"
- Cron Interval = "Every Minute"
... but poller.php (in crontab) is working at every 5 minutes.

Using 1-minute polling is somewhat difficult, so I don't recommend it.
But some useful posts exist:
- http://forums.cacti.net/viewtopic.php?p=213822#p213822
Top
Post Reply

Return to “Help: Linux/Unix Specific”

Who is online

Users browsing this forum: No registered users and 2 guests