[SNMP] Templates for graphing Cisco CBWFQ Policy

[liusc]

Is there anything that i miss out....Is cacti version/PA version issue?
no graph created???

Could you post the graph & data templates setting & data Queries setting?

Yep. I am getting nice graphs.

QoS.gif

[proohu01]

Did you execute "cbindex communityname" on your QoS router? Do you get a good output?

There isn't anything I had to change in the default graph and data template settings to get this to work. It just did. Just give the numbers you get back from the command above a nice name when creating the graphs (such as Gold of Silver)

[liusc]

all ok....but no graph.....

i'm using cacti 0.8.7g with PA2.9

I saw the graph id & data source id is different.

Could you export the template for cacti 0.8.7g?

Thank you

Router#cbindex xxxx
GigabitEthernet0/1 (in): testing-inbound (32)
class-default 32.14640113
testing 32.15963441

+ Running data query [20].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/myQOS.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.4.1.9.9.166.1.15.1.1.11'
+ Index found at OID: '.1.3.6.1.4.1.9.9.166.1.15.1.1.11.32.14640113' value: '0'
+ Index found at OID: '.1.3.6.1.4.1.9.9.166.1.15.1.1.11.32.15963441' value: '145000'
+ index_parse at OID: '.1.3.6.1.4.1.9.9.166.1.15.1.1.11.32.14640113' results: '32.14640113'
+ index_parse at OID: '.1.3.6.1.4.1.9.9.166.1.15.1.1.11.32.15963441' results: '32.15963441'
+ Inserting index data for field 'Index' [value='32.14640113']
+ Inserting index data for field 'Index' [value='32.15963441']
+ Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/myQOS.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/myQOS.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/myQOS.xml'
+ Found data query XML file at '/var/www/html/cacti/resource/snmp_queries/myQOS.xml'

Data Source Debug
/usr/bin/rrdtool create \
/var/www/html/cacti/rra/10_1_15_38_qosbitrate_2979.rrd \
--step 60 \
DS:qosDroprate:GAUGE:120:0:U \
DS:qosPreBitrate:GAUGE:120:0:U \
DS:qosBitrate:GAUGE:120:0:U \
RRA:AVERAGE:0.5:1:500 \
RRA:AVERAGE:0.5:1:600 \
RRA:AVERAGE:0.5:6:700 \
RRA:AVERAGE:0.5:24:775 \
RRA:AVERAGE:0.5:288:797 \
RRA:MAX:0.5:1:500 \
RRA:MAX:0.5:1:600 \
RRA:MAX:0.5:6:700 \
RRA:MAX:0.5:24:775 \
RRA:MAX:0.5:288:797 \

RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-60 \
--title='testing' \
--base=1000 \
--height=120 \
--width=600 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label='bits per second' \
--slope-mode \
--font TITLE:8: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/var/www/html/cacti/rra/10_1_15_38_qosbitrate_2979.rrd":qosBitrate:AVERAGE \
DEF:b="/var/www/html/cacti/rra/10_1_15_38_qosbitrate_2979.rrd":qosPreBitrate:AVERAGE \
DEF:c="/var/www/html/cacti/rra/10_1_15_38_qosbitrate_2979.rrd":qosDroprate:AVERAGE \
AREA:a#74C366FF:"Post class-map" \
GPRINTLAST:"Current\:%8.3lf %s" \
GPRINTAVERAGE:"Average\:%8.3lf %s" \
GPRINTMAX:"Maximum\:%8.3lf %s\n" \
LINE1:b#311F4EFF:"Pre class-map" \
GPRINTLAST:" Current\:%8.3lf %s" \
GPRINTAVERAGE:"Average\:%8.3lf %s" \
GPRINTMAX:"Maximum\:%8.3lf %s\n" \
AREA:c#FF0000FF:"Drop bitrate" \
GPRINT:c:LAST:" Current\:%8.3lf %s" \
GPRINT:c:AVERAGE:"Average\:%8.3lf %s" \
GPRINT:c:MAX:"Maximum\:%8.3lf %s\n"
RRDTool Says:
ERROR: opening '/var/www/html/cacti/rra/10_1_15_38_qosbitrate_2979.rrd': No such file or directory

Did you execute "cbindex communityname" on your QoS router? Do you get a good output?

There isn't anything I had to change in the default graph and data template settings to get this to work. It just did. Just give the numbers you get back from the command above a nice name when creating the graphs (such as Gold of Silver)

[liusc]

Anyone got this graphing cisco cbwfq template for Cacti Version 0.8.7g with PA 2.9?


Please upload?

Thank you all....

[hmorandell]

I did some changes to the script which makes it easier to use.
Will post soon it, have just to clean it up and make then an export.

Just if someone is interested in.

Ciao

[Jake11]

I'm interested! This would be useful for us. Thanks for your efforts hmorandell!

[bgp2002]

I am also interessed in this script! It would be nice to see the name of the queues in the configuration in cacti and to have the advantages of SNMP polling anyway.

[ictnetw]

Hi there.

I've just configured my CACTI to graph outbound traffic of a class using these templates.

Now I need to graph the inbound traffic of the class in the same graph, just like we do with the interfaces, but I haven't found a way to do so.

Is there any way in CACTI to do this?

Best regards,

Ictnetw.

[CABALRMT]

Wow! I cant think I have found your blog. Very helpful info.

[vovochka]

i got a nice graph, but the pre and post traffic seem like not accurate, because even the traffic have exceed the policy limit (10Mbps), the post traffic still same with pre traffic, as below the traffic have reach 26Mbps but the post traffic still the same...

[khem]

Dear All,

I have been searching around for Cisco Class-based traffic graphing. The one on this thread is the best I could find. The others I found use PHP script server/query which is waaayyy too slow than SNMP query.

I have follow instructions on this thread and could successfully create graphs. However, at the "Create Graph" page for a device, the index listing is not meaningful. It shows only plain index numbers (as in the attached image

myqos_create_graph.png (19.36 KiB) Viewed 4873 times

). It should contain the interface names and descriptions.

Anyone has implemented on this? Any help would very much appreciated.

Sincerely,
Khem

[rambest]

Hello,guys good template for me.
Would be great to add int des, direction,configurate rate to that data query.
Would be kindly of you to help us.

[dreemtul]

@hmorandell:
could you repost images from your first post? It becomes really hard for me to add both data sources and graphs

[mozammal]

Hi,

I created the script and save as .tcl in linux and downloaded the scripts using TFTP into router, but while putting the command cbindex communityname or cbindex it shows

SNMP calls with community communityname fail
SNMP calls with community public fail


Can anyone help me out to resolve the problem.


Thanks.

[curly]

Mozammal,
Did you make any progress on the error you were receiving. I'm getting the same error from two different routers running different IOS versions (and different platforms).
Thanks,
Curly.