Adding other devices(not cisco) ??

[Atreides]

Hello, I've installed mactrack ,everything works ok, but I want to know if its possible to add a device that I have in my network. Its a fiber optical IMAP-9400 Allied Telesyn Multiservice Access Plaftorm. I added to device but I dont think there's a good scanning method for it.
This is the output from mactrack_scanner :

[root@centos mactrack]# php mactrack_scanner.php -id=5 -d
DEBUG: HOST: 172.25.232.49 is alive, processing has begun.
DEBUG: Scanning function is 'get_IOS_dot1dTpFdbEntry_ports'
DEBUG: There are -3 VLANS.
DEBUG: ifIndexes data collection complete
DEBUG: ifIndexes data collection complete. '75' rows found!
DEBUG: ifTypes data collection complete. '75' rows found!
DEBUG: ifNames data collection complete. '75' rows found!
DEBUG: ifAlias data collection complete. '75' rows found!
DEBUG: ipAddrTable scanning for link ports data collection complete. '1' rows found!
DEBUG: ifSpeed data collection complete. '75' rows found!
DEBUG: ifHighSpeed data collection complete. '75' rows found!
DEBUG: ifDuplex data collection complete. '0' rows found!
DEBUG: ifDescr data collection complete. '75' rows found!
DEBUG: ifMtu data collection complete. '75' rows found!
DEBUG: ifPhysAddress data collection complete. '75' rows found!
DEBUG: ifAdminStatus data collection complete. '75' rows found!
DEBUG: ifOperStatus data collection complete. '75' rows found!
DEBUG: ifLastChange data collection complete. '75' rows found!
DEBUG: ifInOctets data collection complete. '75' rows found!
DEBUG: ifOutOctets data collection complete. '75' rows found!
DEBUG: ifInNUcastPkts data collection complete. '75' rows found!
DEBUG: ifOutNUcastPkts data collection complete. '75' rows found!
DEBUG: ifInUcastPkts data collection complete. '75' rows found!
DEBUG: ifOutUcastPkts data collection complete. '75' rows found!
DEBUG: ifInDiscards data collection complete. '75' rows found!
DEBUG: ifInErrors data collection complete. '75' rows found!
DEBUG: ifInUnknownProtos data collection complete. '75' rows found!
DEBUG: ifOutDiscards data collection complete. '75' rows found!
DEBUG: ifOutErrors data collection complete. '75' rows found!
DEBUG: ifInterfaces assembly complete: 37206
DEBUG: Adding IfInterfaces Records
DEBUG: Cisco Voice VLAN collection complete
DEBUG: Voice VLANs do not exist on this device
DEBUG: ifInterfaces assembly complete.

INFO: HOST: 172.25.232.49, TYPE: Telesyn 9400 Multiservice Access Platfor, No active end devices on this device.
DEBUG: Scanning function is 'get_CTAlias_table'
DEBUG: FUNCTION: get_CTAlias_table started
DEBUG: CTAliasInterfaces data collection complete: 0
DEBUG: CTAliasMacAddress data collection complete: 0
DEBUG: CTAliasProtocol data collection complete: 0
DEBUG: CTAliasAddressText data collection complete: 0
DEBUG: CTAliasEntries assembly complete: 0
DEBUG: HOST: 172.25.232.49, IP address information collection complete: 0

[Atreides]

Anyone can give me a hint, maybe in creating a scanning method?.