Total Output Drops graph template

[JongNet]

I have a problem with increasing of total output drops then i want to generate graph for monitoring, Anyone can provide?

snmpwalk -v 2c -c public 192.168.1.1 .1.3.6.1.2.1.2.2.1.19
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 81598
IF-MIB::ifOutDiscards.4 = Counter32: 74418
IF-MIB::ifOutDiscards.5 = Counter32: 81066

sh int gigabitEthernet 1/2
GigabitEthernet1/2 is up, line protocol is up (connected)
Hardware is Gigabit Ethernet Port, address is f866.f2b7.c141 (bia f866.f2b7.c141)
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 3/255, rxload 13/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is auto, media type is 10/100/1000-TX
input flow-control is on, output flow-control is on
Auto-MDIX on (operational: on)
ARP type: ARPA, ARP Timeout 04:00:00
Last input 00:00:07, output never, output hang never
Last clearing of "show interface" counters 1w2d
Input queue: 0/2000/0/0 (size/max/drops/flushes); Total output drops: 24836

[gandalf]

There's a standard Interface Traffic Graph Template for that. When "Create Graphs for this Host" has been selected, find that graph template located at the bottom of the interface traffic data query
R.

[WingFlyer21]

Hy everybody!
I have the same problem with total output drops, i can't graph it...
Could anyone tell more exactly which graph type should i choose.
All that i have in graph type menu - on the attached image.