IBM BladeCenter H template
Moderators: Developers, Moderators
IBM BladeCenter H template
Hello i have made a host template for IBM BladeCenter H chassis. I head mutch help from this thread
http://forums.cacti.net/about17708.html .
This template addes the posibilitys to graph the values listed below.
- Temperature of the chassi in/out
- Power usage per blade slot
- Power usage per power domain
- Power usage per fan pack
- Power usage per I/O module
- Power usage per managemnt module
- Voltage for +1,8V, +12V, +2,5V, +3,3V and +5V
- Thermal output (BTU/Hour)
- Fan speed both in porcentage and RPM
This template was tested on a IBM BladCenter H (MT: 8852xxx there X can be a bit diffrent.). Some values works on IBM BladeCenter E to but most dont. Headent have time to develop it for E chassis yet. The template is exported from cacti 0.8.7e.
I hope some have some use for the template. If you have any questions about the template dont hasetat to ask me . And a big thanks for the authers of the base of this template from the abow thred this is only a extended version. Sorry if my english is a bit out of line .
Regards
Magnus
http://forums.cacti.net/about17708.html .
This template addes the posibilitys to graph the values listed below.
- Temperature of the chassi in/out
- Power usage per blade slot
- Power usage per power domain
- Power usage per fan pack
- Power usage per I/O module
- Power usage per managemnt module
- Voltage for +1,8V, +12V, +2,5V, +3,3V and +5V
- Thermal output (BTU/Hour)
- Fan speed both in porcentage and RPM
This template was tested on a IBM BladCenter H (MT: 8852xxx there X can be a bit diffrent.). Some values works on IBM BladeCenter E to but most dont. Headent have time to develop it for E chassis yet. The template is exported from cacti 0.8.7e.
I hope some have some use for the template. If you have any questions about the template dont hasetat to ask me . And a big thanks for the authers of the base of this template from the abow thred this is only a extended version. Sorry if my english is a bit out of line .
Regards
Magnus
- Attachments
-
- cacti_host_template_ibm_bladecenter-h_v1.1.xml
- (420.63 KiB) Downloaded 788 times
-
- ibm_bladecenter_mgmt_module_power_usage.JPG (38.2 KiB) Viewed 12263 times
-
- ibm_bladecenter_io_module_power_usage.JPG (63.48 KiB) Viewed 12263 times
-
- ibm_bladecenter_fan_pack_power_usage_pd1.JPG (43.71 KiB) Viewed 12263 times
-
- ibm_bladecenter_blade_power_usage.JPG (42.86 KiB) Viewed 12263 times
Re: IBM BladeCenter H template
If you get a chance, post it to the template repository:
http://docs.cacti.net/templates
http://docs.cacti.net/templates.guidelines
http://docs.cacti.net/templates
http://docs.cacti.net/templates.guidelines
--
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Re: IBM BladeCenter H template
Added it to the template reposetory
http://docs.cacti.net/usertemplate:host ... decenter_h
Regards
Magnus
http://docs.cacti.net/usertemplate:host ... decenter_h
Regards
Magnus
Re: IBM BladeCenter H template
Excellent. Thanks.
--
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Live fast, die young
You're sucking up my bandwidth.
J.P. Pasnak,CD
CCNA, LPIC-1
http://www.warpedsystems.sk.ca
Re: IBM BladeCenter H template
Hi, guys
have you a idea on my issue?
I uploaded the template "cacti_host_template_ibm_bladecenter_h_v1.1.zip" and i assigned on device in cacti but my graph is blank.
After collectin about my issue on google , it seems that lack a data source for cacti
Could you tell me where i can download that or the link for create the datasource ?
below my setting snmp on my bladecenter Management Module ( serie H and S )
Snmp agent V1 enable
Community:Mycommunity AccesType:Get Hostname or Ip: Mycacti
have you a idea on my issue?
I uploaded the template "cacti_host_template_ibm_bladecenter_h_v1.1.zip" and i assigned on device in cacti but my graph is blank.
After collectin about my issue on google , it seems that lack a data source for cacti
Could you tell me where i can download that or the link for create the datasource ?
below my setting snmp on my bladecenter Management Module ( serie H and S )
Snmp agent V1 enable
Community:Mycommunity AccesType:Get Hostname or Ip: Mycacti
Re: IBM BladeCenter H template
Hello
I goten some emails about problems with the template. It seams that the template have some problems on Cacti 0.8.7g. I alsow have the problem and cant figur out what the problem is. I maybe have a ide what the problem is but need some help.
I noticed in 0.8.7e i get results like the one below
03/21/2011 06:13:22 PM - CMDPHP: Poller[0] Host[87] DS[3159] SNMP: v1: 172.24.4.205, dsname: bc_pwr_usg_pd1_slo1, oid: .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7.17, output: 129
And the same respons in 0.8.7g is the one below
03/21/2011 06:43:14 PM - SPINE: Poller[0] Host[3] TH[1] DS[125] SNMP: v1: 172.24.4.205, dsname: bc_pwr_usg_pd1_slo1, oid: .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7.17, value: 133W
I gues cacti cant handel the valus then it says like in the exampel abow then the value is 133W insted of only 133?
Is it possible to change a setting in the template maybe so cacti can understand the valus that it gets from SNMP?
Almost all valus is presented with some kind of unit like W, V and some other.
Or can this be a spine problem? The 0.8.7e install im using cmdphp to poll and the new 0.8.7g is using spine as you can see in the logoutput abow.
EDIT: I tryed changing from spine to cmd.php as poller and it works i see in the log it removes the W and other units from the SNMP answer. Is that possible to fix so i can use spine to do the same? Happy for any help here .
Can somone maybe help out if there is a solution to this problem.
Thanks in advace.
Regards
Magnus
I goten some emails about problems with the template. It seams that the template have some problems on Cacti 0.8.7g. I alsow have the problem and cant figur out what the problem is. I maybe have a ide what the problem is but need some help.
I noticed in 0.8.7e i get results like the one below
03/21/2011 06:13:22 PM - CMDPHP: Poller[0] Host[87] DS[3159] SNMP: v1: 172.24.4.205, dsname: bc_pwr_usg_pd1_slo1, oid: .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7.17, output: 129
And the same respons in 0.8.7g is the one below
03/21/2011 06:43:14 PM - SPINE: Poller[0] Host[3] TH[1] DS[125] SNMP: v1: 172.24.4.205, dsname: bc_pwr_usg_pd1_slo1, oid: .1.3.6.1.4.1.2.3.51.2.2.10.2.1.1.7.17, value: 133W
I gues cacti cant handel the valus then it says like in the exampel abow then the value is 133W insted of only 133?
Is it possible to change a setting in the template maybe so cacti can understand the valus that it gets from SNMP?
Almost all valus is presented with some kind of unit like W, V and some other.
Or can this be a spine problem? The 0.8.7e install im using cmdphp to poll and the new 0.8.7g is using spine as you can see in the logoutput abow.
EDIT: I tryed changing from spine to cmd.php as poller and it works i see in the log it removes the W and other units from the SNMP answer. Is that possible to fix so i can use spine to do the same? Happy for any help here .
Can somone maybe help out if there is a solution to this problem.
Thanks in advace.
Regards
Magnus
Re: IBM BladeCenter H template
Hello.
I am having the same problem with spine 0.8.6g and this template. Have anyone found a solution?
Thanks.
I am having the same problem with spine 0.8.6g and this template. Have anyone found a solution?
Thanks.
Re: IBM BladeCenter H template
Hello
I still have problems with spine and that it dont handel the SNMP data. As said before here in the thread. I installed the new release today of 0.8.7i of cacti + spine.
Still have the same problem. Gone include some pictures.
Picture 1: Showes that the values work with fan speed in rpm using spine.
Picture 2: Showes that then getting the values as percentage it dont get any info
Picture 3: Showes that the data for the RPM graph is only a plane number like 3680 for exampel.
Picture 4: Shoews that spine cant update the rras only the once goten only numeric values. Cant updated the once contauing more text.
Picture 5: Shoews that then i change to cmd.php as poller insted both works and the graphs work fine.
Why does doesen´t spine handel the text like cmd.php it seams for exampel in picture 3 that spine keep the text "% of maximum" then using cmd.php it removes it and can insert it into the RRA.
Any sugestions what can be wrong. Hope someone have any ide how to fix it.
Sorry for a bit bad english.
Thanks in advanc
Regards
Magnus
I still have problems with spine and that it dont handel the SNMP data. As said before here in the thread. I installed the new release today of 0.8.7i of cacti + spine.
Still have the same problem. Gone include some pictures.
Picture 1: Showes that the values work with fan speed in rpm using spine.
Picture 2: Showes that then getting the values as percentage it dont get any info
Picture 3: Showes that the data for the RPM graph is only a plane number like 3680 for exampel.
Picture 4: Shoews that spine cant update the rras only the once goten only numeric values. Cant updated the once contauing more text.
Picture 5: Shoews that then i change to cmd.php as poller insted both works and the graphs work fine.
Why does doesen´t spine handel the text like cmd.php it seams for exampel in picture 3 that spine keep the text "% of maximum" then using cmd.php it removes it and can insert it into the RRA.
Any sugestions what can be wrong. Hope someone have any ide how to fix it.
Sorry for a bit bad english.
Thanks in advanc
Regards
Magnus
- Attachments
-
- Picture 5
- 5_ibm_bladecenter_h_fan_speed_cacti_log_output_cmd_poller.JPG (75.33 KiB) Viewed 11183 times
-
- Picture 4
- 4_ibm_bladecenter_h_fan_speed_cacti_log_output_rrdtool_update.JPG (53.85 KiB) Viewed 11183 times
-
- Picture 3
- 3_ibm_bladecenter_h_fan_speed_cacti_log_output.JPG (42.36 KiB) Viewed 11183 times
-
- Picture 2
- 2_ibm_bladecenter_h_fan_speed_rpm.JPG (44.94 KiB) Viewed 11183 times
-
- Picture 1
- 1_ibm_bladecenter_h_fan_speed_procents.JPG (39.57 KiB) Viewed 11183 times
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Re: IBM BladeCenter H template
This is 'i' spine?
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Re: IBM BladeCenter H template
Hello
Yes its Cacti 0.8.7i and Spine 0.8.7i. Have head this problems since maybe 0.8.7e or 0.8.7g.
Regards
Magnus
Yes its Cacti 0.8.7i and Spine 0.8.7i. Have head this problems since maybe 0.8.7e or 0.8.7g.
Regards
Magnus
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Re: IBM BladeCenter H template
Use the attached 'instrumented' binary side band, in other words, not in production. When running, do the following:
Where the host_id is the host_id of the host that needs stripping. Attach the output for review.
TheWitness
Code: Select all
./spine -R -V 3 -S -f <host_id> -l <host_id>
TheWitness
- Attachments
-
- poller.zip
- (11.53 KiB) Downloaded 309 times
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Re: IBM BladeCenter H template
Hello
How do i compile the file in the zip file? host_id is that an IP or a file name?
Regards
Magnus
How do i compile the file in the zip file? host_id is that an IP or a file name?
Regards
Magnus
Re: IBM BladeCenter H template
Hello again
I put the poller.c in the spine src dir from 0.8.7i folder replacing the original. Compiled the binary as youre documentation said and installed it. Se below a log from cacti. Dont know if it helps. I have a totaly isolated cacti install so i replaced the old one. Hope it shoews you somthing that can help.
Regards
Magnus
I put the poller.c in the spine src dir from 0.8.7i folder replacing the original. Compiled the binary as youre documentation said and installed it. Se below a log from cacti. Dont know if it helps. I have a totaly isolated cacti install so i replaced the old one. Hope it shoews you somthing that can help.
Regards
Magnus
- Attachments
-
- log_from_new_spine_binary.JPG (662.35 KiB) Viewed 11166 times
- TheWitness
- Developer
- Posts: 17047
- Joined: Tue May 14, 2002 5:08 pm
- Location: MI, USA
- Contact:
Re: IBM BladeCenter H template
You need to follow my instructions to the letter. What you posted means nothing...
True understanding begins only when we realize how little we truly understand...
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Life is an adventure, let yours begin with Cacti!
Author of dozens of Cacti plugins and customization's. Advocate of LAMP, MariaDB, IBM Spectrum LSF and the world of batch. Creator of IBM Spectrum RTM, author of quite a bit of unpublished work and most of Cacti's bugs.
_________________
Official Cacti Documentation
GitHub Repository with Supported Plugins
Percona Device Packages (no support)
Interesting Device Packages
For those wondering, I'm still here, but lost in the shadows. Yearning for less bugs. Who want's a Cacti 1.3/2.0? Streams anyone?
Re: IBM BladeCenter H template
Hello again and sorry for doing it wrong. Hope this is the right way.
Check the image below. I took the ID from Console > Devices and the ID for the device. Hope it can tell you something usefull.
Regards
Magnus
Check the image below. I took the ID from Console > Devices and the ID for the device. Hope it can tell you something usefull.
Regards
Magnus
- Attachments
-
- spine-output
- spine-output.JPG (100.09 KiB) Viewed 11153 times
Who is online
Users browsing this forum: No registered users and 0 guests