pl hlep me to re-setup cacti. Now all broken

[ashokwe]

Hi, I am new to linux and cacti but love to use it. I was adding new devices, arranging graph tree and wanted to use weather map. However I wanted to get interface description and using ifAlis I did it. Then I lost interface ID. So I re inserted IfDescr. Then I got only ethernet but not the interface id. So I add ifName as well. I did all this on data queries. Now all my graphs are gone. Pl help me to get this going before I loose my job.

Data Queries > SNMP - Interface Statistics> In/Out Bits >
I have

Data Template - Interface - Traffic
name |host_description| - Traffic - |query_ifDescr|
name |host_description| - Traffic - |query_ifName|
name |host_description| - Traffic - |query_ifIP| - |query_ifName|
name |host_description| - Traffic - |query_ifIP|/|query_ifDescr|
rrd_maximum |query_ifSpeed|



Graph Template - Interface - Traffic (bits/sec)
titile |host_description| - Traffic - |query_ifDescr| - |query_ifName|
title |host_description| - Traffic - |query_ifDescr|/|query_ifIndex|
title |host_description| - Traffic - |query_ifIP| (|query_ifDescr|)

Data Templates> Interface - Traffic>

Data Templates Name [edit: Interface - Traffic]

Data Source Name | host_description| - Traffic - |query_ifDescr| - |query_ifName|



Graph Templates> Interface - Traffic (bits/sec) >
Template Name Interface is - Traffic (bits/sec)

Graph Title is |host_description| - Traffic - |query_ifDescr| - |query_ifName|



When RRD graph debug is on I got the following


RRDTool Command:

/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-60 \
--title="B100-CR - Traffic - TenGigabitEther - Te1/2" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:8: \
--font UNIT:8: \
DEF:a="/var/www/html/rra/b100-cr_traffic_in_2739.rrd":traffic_in:AVERAGE \
DEF:b="/var/www/html/rra/b100-cr_traffic_in_2739.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
CDEF:cdefi=+,TIME,1322780435,GT,a,a,UN,0,a,IF,IF,TIME,1322780435,GT,b,b,UN,0,b,IF,IF,+ \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s" \

RRDTool Says:

ERROR: RPN stack underflow

[ashokwe]

I am searching everywhere get a proper fix. So far no luck

[gandalf]

The cdefi is broken. But it is never used. Which Graph Template are you using here?
R.

[ashokwe]

The cdefi is broken. But it is never used. Which Graph Template are you using here?
R.

I am using Graph Template - Interface - Traffic (bits/sec)

titile |host_description| - Traffic - |query_ifDescr| - |query_ifName|

Pl tell me way out. Thanks

[gandalf]

Please select the last item (Comment) and post the resulting screenshot
R.

[ashokwe]

Please select the last item (Comment) and post the resulting screenshot
R.

I have select the comment (Item 9) and pased the screen shot here. Once I went to this area to explore how to add two graphs. Is that attempt saved without proper config and giving me this problem?

Since you are kindly helping me out I will wait for your instructions to delete it and see or any as per your instruction.

[gandalf]

As a first attempt, please delete that entry (you will do this from the previous screen)
R.

[ashokwe]

As a first attempt, please delete that entry (you will do this from the previous screen)
R.

Thanks gandalf. It works fine. No data loss. Everything works fine. I started setting up weathermap. So far things moving fine. Thank you very much for putting me to the right direction. I will keep posting my progress. Thanks again.