Trouble with Thold 0.4.7-1

[joseme]

Hi:
I installed Thold 0.4.7-1, but I see an error log (each pool):

10/13/2011 12:45:05 PM - CMDPHP: Poller[0] ERROR: A DB Exec Failed!, Error:'1064', SQL:"INSERT INTO plugin_thold_host_failed (host_id) VALUES )'

when I see that table:
mysql> select * from plugin_thold_host_failed;
Empty set (0.00 sec)

and..
mysql> desc plugin_thold_host_failed;
+---------+------------------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |
+---------+------------------+------+-----+---------+----------------+
| id | int(12) unsigned | NO | PRI | NULL | auto_increment |
| host_id | int(12) unsigned | NO | | NULL | |
+---------+------------------+------+-----+---------+----------------+
2 rows in set (0.00 sec)

By the way, for what is the field: "Notification email" on Devices? (look attached file). I guess an extra e-mail, but when I try to write one, that's not saved..

Regards...

[TheWitness]

I'll have to take a look at that email issue. Take the latest SVN to fix the other issue. There are a number of issues that are being worked on at this time. Sorry about the release. It's 10 steps forward and 4 backward.

svn://svn.cacti.net/cacti_plugins/thold/branches/stable

[TheWitness]

Hi:
I installed Thold 0.4.7-1, but I see an error log (each pool):

10/13/2011 12:45:05 PM - CMDPHP: Poller[0] ERROR: A DB Exec Failed!, Error:'1064', SQL:"INSERT INTO plugin_thold_host_failed (host_id) VALUES )'

when I see that table:
mysql> select * from plugin_thold_host_failed;
Empty set (0.00 sec)

and..
mysql> desc plugin_thold_host_failed;
+---------+------------------+------+-----+---------+----------------+
| Field | Type | Null | Key | Default | Extra |
+---------+------------------+------+-----+---------+----------------+
| id | int(12) unsigned | NO | PRI | NULL | auto_increment |
| host_id | int(12) unsigned | NO | | NULL | |
+---------+------------------+------+-----+---------+----------------+
2 rows in set (0.00 sec)

By the way, for what is the field: "Notification email" on Devices? (look attached file). I guess an extra e-mail, but when I try to write one, that's not saved..

Regards...

You must have attempted a patch instead of using the full files. In 4.7-1 there is NO "Notification Email" field. So, double check your numbers.

TheWitness

[joseme]

Hi Witness:
I aplied the svn thold, and the error log dissapeared.
You're right, I made a mistake ,that "text field" was of "nmidupdownmonitor" plugin, I uninstalled it, so I hope Thold works for it...

thanks!!

[sukanta]

Following Two issue found:


1) Threshold logic changed! Earlier was triggering if value is grater that threshold but now it is grater than equal to threshold.

Hope following changes is sufficient:

In thold_functions.php

Old:

Code: Select all

	if ($currentval != '') {
			$breach_up = ($item['thold_hi'] != '' && $currentval >= $item['thold_hi']);
			$breach_down = ($item['thold_low'] != '' && $currentval <= $item['thold_low']);
			$warning_breach_up = ($item['thold_warning_hi'] != '' && $currentval >= $item['thold_warning_hi']);
			$warning_breach_down = ($item['thold_warning_low'] != '' && $currentval <= $item['thold_warning_low']);
		}

New:

Code: Select all

 if ($currentval != '') {
			$breach_up = ($item['thold_hi'] != '' && $currentval > $item['thold_hi']);
			$breach_down = ($item['thold_low'] != '' && $currentval < $item['thold_low']);
			$warning_breach_up = ($item['thold_warning_hi'] != '' && $currentval > $item['thold_warning_hi']);
			$warning_breach_down = ($item['thold_warning_low'] != '' && $currentval < $item['thold_warning_low']);
		} 

[TheWitness]

I've asked Cigamit to comment on this.

[hmorandell]

Hello,

I have the following problems:

I came from a previous version of thold (0.4.4.x) and I have about 500 tholds which are based on thold templates. The interface status is checked, if the status goes above 1.5 it should trigger an alert, if the status is 1 veerything is alright.

Since the upgtrade to the last version the logic is exactly vice-versa. When the interface is ok, I get an alert trigger, while when the interface is in error I get a message everything is alright.

This is not happening when I do not thols templates!!!

Anyone else experiencing the same problem?


example:

"SHDSL 0/0/0 Pair 1 [int_status] went above threshold of 1.5 with 1"

[sukanta]

Hello,

I have the following problems:

I came from a previous version of thold (0.4.4.x) and I have about 500 tholds which are based on thold templates. The interface status is checked, if the status goes above 1.5 it should trigger an alert, if the status is 1 veerything is alright.

Since the upgtrade to the last version the logic is exactly vice-versa. When the interface is ok, I get an alert trigger, while when the interface is in error I get a message everything is alright.

This is not happening when I do not thols templates!!!

Anyone else experiencing the same problem?


example:

"SHDSL 0/0/0 Pair 1 [int_status] went above threshold of 1.5 with 1"

Not Really but there was small change in logic which mention in this thread & which has been corrected in SVN 1882 (Thanks thewitness!)..

[sukanta]

Another Small issue found:

Showing Rows is incorrect. It should be 1 to 30 as per attached setup & showing 1-30 results only.

thold_page.png (4.98 KiB) Viewed 3034 times

[hmorandell]

There is an error in the last svn thold_functions.php file.

At line 1311 it is:

$breach_up = ($item['thold_hi'] != '' && $currentval < $item['thold_hi']);

while it should be:

$breach_up = ($item['thold_hi'] != '' && $currentval >= $item['thold_hi']);

This fixes my error! Hopefully someone can include this in the last SVN!

Hello,

I have the following problems:

I came from a previous version of thold (0.4.4.x) and I have about 500 tholds which are based on thold templates. The interface status is checked, if the status goes above 1.5 it should trigger an alert, if the status is 1 veerything is alright.

Since the upgtrade to the last version the logic is exactly vice-versa. When the interface is ok, I get an alert trigger, while when the interface is in error I get a message everything is alright.

This is not happening when I do not thols templates!!!

Anyone else experiencing the same problem?


example:

"SHDSL 0/0/0 Pair 1 [int_status] went above threshold of 1.5 with 1"

Not Really but there was small change in logic which mention in this thread & which has been corrected in SVN 1882 (Thanks thewitness!)..

[TheWitness]

This will be corrected in 0.4.8

[sukanta]

Weathermap Not Working after thold upgrade!

Rollback to 0.4.4


Pl investigate!

[TheWitness]

Weathermap Not Working after thold upgrade!

Rollback to 0.4.4


Pl investigate!

You investigate and let us know what you find. Thanks.