Cacti for Mikrotik Routerboard 750G

[f1saranlinux]

Friends

Can you help me on showing the ways to get cacti graphs up and running. I guess i didn't get the correct host template. I'll show you my current configuration and settings both at cacti and mikrotik device.

---------------------------------------
My current cacti version is : 0.8.7e
---------------------------------------
#Device Registeration#
Host Template that i used is : Generic SNMP-Enabled Host
Ping and Downed Detection : PING and SNMP
SNMP version : 1
SNMP Community : public
SNMP port : 161

##The results upon registration##
SNMP Information
System:router
Uptime: 66489600 (7 days, 16 hours, 41 minutes)
Hostname: EDMI_Technologies
Location: Senai III
Contact:

Ping Results
ICMP Ping Success (3.760 ms)

#Will attached the graph results I received#

---------------------------------------
My current Mikrotik version is : 4.11
---------------------------------------
[admin@EDMI_Technologies] /snmp> print
enabled: yes
contact: ""
location: "Senai III"
engine-id: ""
engine-boots: 0
time-window: 15
trap-sink: 0.0.0.0
trap-community: public
trap-version: 1

[admin@EDMI_Technologies] /snmp community> print
# NAME ADDRESS SECURITY READ-ACCESS
0 public 0.0.0.0/0 none yes


Hope i can get solutions from you all. Thanks.

Rgds
Saran