[SOLVED] Template monitor Power Supply for Juniper EX series

[schukido]

Dear all,

I tried to add template to monitor Power Supply for Juniper EX series by edit Cisco 6509 template in this forum (http://forums.cacti.net/viewtopic.php?f=12&t=10491 ) But it's not successful, I dont know the OID of Juniper to snmpwalk Power Supply and I try to use this:
1.3.6.1.4.1.2636.3.1.13.1.6.2 = Power Supply ( link reference http://kb.juniper.net/InfoCenter/index? ... 7&actp=RSS ).

I verbose query snmp and it only detect 2 items and 1 row ( just only Power Supply 1, i want to see PS0 and PS1 also ). Does anyone have Juniper Power Supply Data Source Template plz share with me. Many thanks and best regards.

Hope to see all of yours reply

There is my datasource template xml:

<interface>
<name>Juniper EnvMon Power</name>
<description>Get Juniper Environmental Monitoring Power supply Data</description>
<oid_index>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid_index>
- <fields>
- <SupplyStatusDescr>
<name>Description</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid>
</SupplyStatusDescr>
- <SupplyState>
<name>State</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.2636.3.1.13.1.6.2</oid>
</SupplyState>

[noname]

1) </fields> and </interface> are missing at the bottom of XML
2) For <SupplyState> field, <direction> should be "output" if you want to draw its value as graph line

And, if snmpwalk shows results as this post, you'll have to parse last 3 dimensions of its OID (.1.3.6.1.4.1.2636.3.1.13.1.5.2.x.y.z) for using it as index.

- HowTo: Data Query Templates - SNMP Index does not exist

Try this XML query:

Code: Select all

<interface>
<name>Juniper EnvMon Power</name>
<description>Get Juniper Environmental Monitoring Power supply Data</description>
<oid_index>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid_index>
<oid_index_parse>OID/REGEXP:.*\.([0-9]\.[0-9]\.[0-9])$</oid_index_parse>
<fields>
	<SupplyStatusDescr>
		<name>Description</name>
		<method>walk</method>
		<source>value</source>
		<direction>input</direction>
		<oid>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid>
	</SupplyStatusDescr>
	<SupplyState>
		<name>State</name>
		<method>walk</method>
		<source>value</source>
		<direction>output</direction>
		<oid>.1.3.6.1.4.1.2636.3.1.13.1.6.2</oid>
	</SupplyState>
</fields>
</interface>

[schukido]

@noname: Thank u for your help. I solved this problem by your guide. Now I can monitor the power supply of Juniper switch EX series.

DungTQ

NOC Engineer

[schukido]

Right data queries template here.

Code: Select all

<interface>
<name>Juniper EnvMon Power</name>
<description>Get Juniper Environmental Monitoring Power supply Data</description>
<oid_index>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid_index>
<oid_index_parse>OID/REGEXP:.*\.([0-9]\.[0-9]\.[0-9])$</oid_index_parse>
<fields>
   <SupplyStatusDescr>
      <name>Description</name>
      <method>walk</method>
      <source>value</source>
      <direction>input</direction>
      <oid>.1.3.6.1.4.1.2636.3.1.13.1.5.2</oid>
   </SupplyStatusDescr>
   <SupplyState>
      <name>State</name>
      <method>walk</method>
      <source>value</source>
      <direction>input</direction>
      <oid>.1.3.6.1.4.1.2636.3.1.13.1.6.2</oid>
   </SupplyState>
   <SupplyStateOut>
      <name>State</name>
      <method>walk</method>
      <source>value</source>
      <direction>output</direction>
      <oid>.1.3.6.1.4.1.2636.3.1.13.1.6.2</oid>
   </SupplyStateOut>
</fields>
</interface>