This is a host template for the ADSL statistics of the "Gennet Oxygen" ADSL router that it is provided to the users of the Greek ISP Tellas/Wind
It displays the most of the ADSL status statistics, such as:
- Remote Signal
- Cell Rate
- Local DSL Errors
- Local Signal
- Loss of Signal
- Remote DSL Errors
- Bit Rate
- Traffic
The above metrics are collected through the router's web administration interface since the ssh/telnet capabilities needs hacking to be permanently enabled.
To use this plugin you need to know the hostname, username and password of the web interface of the router.
For the execution of this plugin you need to do for the gennet_oxygen_gr.sh:
1. install "curl"
2. check the paths on the script to much those of your OS.
3. the FIRMWARE string of the router to match the one of the script
To test it with success, you must see something like the below:
Code: Select all
1006:root@poseidon:/usr/local/share/cacti/scripts# ./gennet_oxygen_gr.sh -H adslrouter.home.gr -u admin -p admin
download:1 upload:3 bit_receive:1777100 bit_transmit:886800 cell_receive:4191 cell_transmit:2091 loss_local:0 loss_remote:0 local_noise:5.30 remote_noise:11.0 local_attenuation:47.0 remote_attenuation:30.0 local_power:12.3 remote_power:16.2 severe_local:0 severe_remote:0 corrected_local:2827109 corrected_remote:4300 checksum_local:378 checksum_remote:6 header_local:401 header_remote:84
The current plugin configured and tested on FreeBSD but tested on Centos Linux with success as well.
The firmware substring of the Gennet Oxygen ADSL router it was tested and developed is "TEL02_4.63"
See below a sample of the graphs, 3 of the total 8 available:
- An example of the generated graphs
- adsl_local_signal.png (19.35 KiB) Viewed 1473 times
- adsl_local_errors.png (23.31 KiB) Viewed 1473 times
- adsl_traffic.png (25.08 KiB) Viewed 1473 times