Aruba Mobility Controller templates

[niobe]

Aruba MC templates, tested on Aruba OS 5.0 only (may work on 3.x)

Four templates and one data query included in the zip file below.

Some of the included stats are :
- CPU (up to 32 cpus)
- Memory
- Registered APs
- Associated Stations
- Average Users per AP
- Total Users
- Users by Authentication method (802.1x, captive portal etc)

cheers,

N!

Associations & Registrations

aruba_assoc_registr.php.png (28.56 KiB) Viewed 19339 times

CPU Load

aruba_cpu.png (22.93 KiB) Viewed 19339 times

Memory Usage

aruba_mem.png (28.73 KiB) Viewed 19339 times

This graph may need some explanation. The Unauth/Disassoc stat is calculated by a CDEF. It is the different between 'Total' and the sum of the other stats. What this figure turns out to be mean is 2 things: it is the sum of the unauthenticated users (those in "logon" type roles), and authenticated users who are no longer in the station table - i.e. those who've just disassociated for some reason. Apparently users hang around for a while in the user table even when they've left the station table in case they come back. The other stats all represent active,authenticated users.

Users Stats

aruba_user.png (38.09 KiB) Viewed 19339 times

[jplevel]

I cannot get the CPU or User template to work.. any Caveats?

[jplevel]

this is the error i get in the user graph:

RRDTool Says:
ERROR: invalid rpn expression in: f,,-


and this is the error i get with the CPU:
RRDTool Says:
ERROR: opening '/var/lib/cacti/rra/aruba_800_aruba_cpu_load_795.rrd': No such file or directory

[jplevel]

looks like i fixed the user stats.. your cdef was circular it was f minus the CDEF.. thus i just set the CDEF to this: f,a,-,b,-,c,-,d,-,e,- and it started graphing

[niobe]

Thanks jplevel, I have noticed that when making the graphs the data items may be added/deleted and this can break the CDEF for users doing a fresh install

[sirokuma]

Hello, this template is very useful for me.
But I can't create graph of CPU load, others seems to be working fine (I fixed CDEF as above).

When I create cpu load graph, three fields are requested. And I don't know what should I set.
・Output Type ID
・Index Value
・Index Type
Can you kindly suggest values for this? Should I install Aruba-MIB to determine cpu index ?
My aruba controller is Aruba3400(OS Version 5.0.3.0), and no multiple CPU.

Thank you.

[niobe]

Something is wrong here - you shouldn't be prompted for indices, that is what the data query is for.
Have you added the data query to your host or added the graph by mistake?

[sirokuma]

I created a data query from arbua_cpu.xml with type "Get SNMP Data (Indexed)".
And I added the query to "Associated Data Queries" of the aruba device.
And the query found 1 Supervisor Card and 11 NPs by reload.

But I can't create cpu graph from template...
What should I do next? I'm not good at using cacti templates.

Thank you.

[niobe]

Honestly, it's hard to say. Data queries based graphs have cost me more time with cacti than anything else. They are complex and hard to debug *sigh*
That said, let's have a go..

Your query sounds like it's working ok, but can you post the output of the 'verbose query' from the device page.
Also what cacti version?

[noname]

Though I'm not sure that whether if I can describe my thought correctly,

did you include Data Query definitions (hash_04xxxx) in your template? (I can't find..)
Like this:

Code: Select all

<cacti>	
	<hash_040021...>
		<name>Aruba CPU Load</name>
		<description>Collect Aruba CPU Indices and Load</description>
		<xml_path><path_cacti>/resource/snmp_queries/aruba_cpu.xml</xml_path>
		<data_input_id>hash_030021...</data_input_id>
		<graphs>
			<hash_110021...>
				<name>Aruba - CPU Load</name>
				<graph_template_id>hash_000021...</graph_template_id>
				<rrd>
					<item_000>
						<snmp_field_name>arubaCpuLoad</snmp_field_name>
						<data_template_id>hash_010021...</data_template_id>
						<data_template_rrd_id>hash_080021...</data_template_rrd_id>
					</item_000>
				</rrd>
				<sv_graph>
					<hash_120021...>
						<field_name>title</field_name>
						<sequence>1</sequence>
						<text>|host_description| - Aruba - |query_arubaCpuDesc| Load</text>
					</hash_120021...>
				</sv_graph>
				<sv_data_source>
					<hash_130021...>
						<field_name>name</field_name>
						<data_template_id>hash_010021...</data_template_id>
						<sequence>1</sequence>
						<text>|host_description| - Aruba - |query_arubaCpuDesc| Load</text>
					</hash_130021...>
				</sv_data_source>
			</hash_110021...>
		</graphs>
	</hash_040021...>
</cacti>

Data Queries

Data Queries - Associated Graph/Data Templates


// But sorry, I can't verify it because I don't have Aruba device..

[sirokuma]

Hello, this is verbose output of data query.
And my cacti version is 0.8.7g.

+ Running data query [10].
+ Found type = '3' [snmp query].
+ Found data query XML file at '/usr/share/cacti/resource/aruba_cpu.xml'
+ XML file parsed ok.
+ Executing SNMP walk for list of indexes @ '.1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.1' value: '14'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.4' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.5' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.6' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.7' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.8' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.9' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.10' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.11' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.12' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.13' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.14' value: '0'
+ Index found at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.15' value: '0'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.1' results: '1'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.4' results: '4'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.5' results: '5'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.6' results: '6'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.7' results: '7'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.8' results: '8'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.9' results: '9'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.10' results: '10'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.11' results: '11'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.12' results: '12'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.13' results: '13'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.14' results: '14'
+ index_parse at OID: '1.3.6.1.4.1.14823.2.2.1.1.1.9.1.3.15' results: '15'
+ Inserting index data for field 'arubaCpuIndex' [value='1']
+ Inserting index data for field 'arubaCpuIndex' [value='4']
+ Inserting index data for field 'arubaCpuIndex' [value='5']
+ Inserting index data for field 'arubaCpuIndex' [value='6']
+ Inserting index data for field 'arubaCpuIndex' [value='7']
+ Inserting index data for field 'arubaCpuIndex' [value='8']
+ Inserting index data for field 'arubaCpuIndex' [value='9']
+ Inserting index data for field 'arubaCpuIndex' [value='10']
+ Inserting index data for field 'arubaCpuIndex' [value='11']
+ Inserting index data for field 'arubaCpuIndex' [value='12']
+ Inserting index data for field 'arubaCpuIndex' [value='13']
+ Inserting index data for field 'arubaCpuIndex' [value='14']
+ Inserting index data for field 'arubaCpuIndex' [value='15']
+ Located input field 'arubaCpuDesc' [walk]
+ Executing SNMP walk for data @ '.1.3.6.1.4.1.14823.2.2.1.1.1.9.1.2'
+ Found item [arubaCpuDesc='Supervisor Card CPU'] index: 1 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU4'] index: 4 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU5'] index: 5 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU6'] index: 6 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU7'] index: 7 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU8'] index: 8 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU9'] index: 9 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU10'] index: 10 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU11'] index: 11 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU12'] index: 12 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU13'] index: 13 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU14'] index: 14 [from value]
+ Found item [arubaCpuDesc='Network Processor CPU15'] index: 15 [from value]
+ Found data query XML file at '/usr/share/cacti/resource/aruba_cpu.xml'
+ Found data query XML file at '/usr/share/cacti/resource/aruba_cpu.xml'
+ Found data query XML file at '/usr/share/cacti/resource/aruba_cpu.xml'

I attach screen shots of 'device view' and 'Data Queries view'.

Thank you.

[niobe]

There's the problem - there should be an associated graph template under the data query "Aruba - cpu load"
You can manually add it if it still exists. The screen should like below after adding.

[sirokuma]

Thank you very much, niobe. Finally I got cpu load graphs with your advise
When I associated the query with the graph template, 'Suggested Values' are empty.
Though I did not manually set them, cpu load graphs were created.

[gladlow]

When trying to import the cacti_graph_template_aruba_-_user_stats.xml I receive the following message, Cacti version 0.8.8.

Notice: Only variable references should be returned by reference in /var/www/html/cacti-0.8.8/lib/import.php on line 689

Fatal error: Unsupported operand types in /var/www/html/cacti-0.8.8/lib/import.php on line 86

cacti.log has one line parse_xml_hash ERROR wrong hash format.

Any ideas ??

[niobe]

Maybe incompatibility with 0.88? These were developed on 0.87g.