Generic OID for IP accounting

[martinhem]

Hello all, Im trying to get IP Accounting graphs.

This is my output from the command line:

snmpwalk -c "public-community" -v1 10.78.XXX.3 .1.3.6.1.4.1.9.2.4.9

SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.100.10.78.XX.241 = IpAddress: 10.78.XX.100
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.100.10.78.XX.244 = IpAddress: 10.78.XX.100
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.100.10.78.XX.250 = IpAddress: 10.78.XX.100
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.101.10.78.XX.246 = IpAddress: 10.78.XX.101
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.102.10.78.XX.242 = IpAddress: 10.78.XX.102
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.103.10.78.XX.244 = IpAddress: 10.78.XX.103
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.104.10.78.XX.246 = IpAddress: 10.78.XX.104
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.105.10.78.XX.242 = IpAddress: 10.78.XX.105
SNMPv2-SMI::enterprises.9.2.4.9.1.1.10.78.XX.106.10.78.XX.242 = IpAddress: 10.78.XX.106

Im trying:

add device
Create Graphs for this Host (SNMP - Generic OID Template)
OID = .1.3.6.1.4.1.9.2.4.9

But I cannot get the data. Any suggestion?

Thanks in advance.

[gandalf]

What data did you expect to show up? How do you want to graph an IP@?
R.

[martinhem]

Hello Gandalf
I want to show bar graphics whit IP and amount of traffic.

Thanks.

[gandalf]

You want to separate the traffic of different users, e.g. for accounting?
In case you have a specific interface for each "customer" (e.g. in a WISP use case), this is doable. Else, you will need e.g. a flow scanner
R.

[martinhem]

Im only have snmp for monitoring.
Im trying sasacct but I have some problem with configuration.

Im working on it, later I will try to add sasacct to cacti graphs.

Thanks