Cacti Host template for Summit Development QAM 10G - this is 100Mbps point to point radio link in 10GHz band, especially used in Czech and Slovak Republic. I hope it works for all Summit Development 10GHz links, these days for UNIc 10G, QAM 10G, NARROW 10G, ALTER 10G, SDV 10G. Probably it should also work for SDV 11G (11GHz band) if you change channel numbers in Frequency graph template. For more information see vendor website http://www.summitd.cz
Graph Templates
----------------
SummitD - BER
SummitD - DataSpeed
SummitD - Frequency
SummitD - Received signal
SummitD - Temperature
SummitD - Uptime
Installation:
Just import cacti_host_template from cacti web interface Console => Import templates => Import Template from Local File ( http://server/cacti/templates_import.php ).
Summit Development QAM10G
Moderators: Developers, Moderators
Summit Development QAM10G
- Attachments
-
- cacti_host_template_summit_development_v1.1.zip
- (131.67 KiB) Downloaded 99 times
Last edited by trifid2 on Fri Jul 08, 2011 7:01 am, edited 7 times in total.
Re: Summit Development QAM 10G
...and graphs
- Attachments
-
- signal.png (17.84 KiB) Viewed 1230 times
-
- ber.png (18.41 KiB) Viewed 1334 times
-
- dataspeed.png (30.58 KiB) Viewed 1334 times
-
- frequency.png (17.63 KiB) Viewed 1334 times
Last edited by trifid2 on Fri Jul 08, 2011 6:29 am, edited 1 time in total.
Re: Summit Development QAM 10G
...and graphs
- Attachments
-
- temperature.png (15.94 KiB) Viewed 1334 times
-
- uptime.png (14.25 KiB) Viewed 1334 times
Re: Summit Development QAM 10G
These devices has been tested:
QAM10G-100, working fine
SDV10G-180, working fine (you need CPU firmware ver.1.12 or above)
QAM10G-100, working fine
SDV10G-180, working fine (you need CPU firmware ver.1.12 or above)
Who is online
Users browsing this forum: No registered users and 3 guests