Bandwidth Utilisation Graph

[CiaranDES]

Hi, I'm new to Cacti and am just looking to set it up to monitor Bandwidth utilisation on WAN links. I have successfully installed cacti and have added some Cisco routers to it. However, the graphs I am getting for bits/sec, total bandwidth look like this:

cactiGraph.png (5.9 KiB) Viewed 1325 times

.

The RRDTool command isn't throwing up any errors:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Galway Custom House - Traffic - AT0" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Apache2/htdocs/cacti/rra/galway_custom_house_traffic_in_20.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Apache2/htdocs/cacti/rra/galway_custom_house_traffic_in_20.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdeff=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"Total In\: 147.62 MB\n" \
LINE1:cdeff#002A97FF:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"Total Out\: 14.85 MB\n"
RRDTool Says:

OK


Any help would be much appreciated?

[noname]

Similar topics:
- Not displaying Title or Legend or side text
- no title or legend in graphs

[CiaranDES]

Many thanks, I was missing a value for RRDTool Default font.

[IdomaLotLut]

InterWorxSiteWorx Accounts - Overview"

Why is the total number, at the bottom, for Bandwidth Used, not reset every month like they are for each account?
_________________
The best things in life must come by effort from within, not by gifts from the outside.
http://www.ps2netdrivers.net/manual/pan ... -42px71ea/

[rony]

Because it's a total for the time frame being displayed on the graph.