Cable Modem Upstream SNR from Cisco 7200

[fbrockerhoff]

Hello,

does anybody create a template to get the _Upstream_ SNR from a cisco ubR 7246VXR cable modem router? I already monitor the downstream from the cable modem at customer side via SNMP (Docsis).

Regards,

Falk

[hgd26]

Hello,

does anybody create a template to get the _Upstream_ SNR from a cisco ubR 7246VXR cable modem router? I already monitor the downstream from the cable modem at customer side via SNMP (Docsis).

Regards,

Falk

Search in the forum.

Example:
http://forums.cacti.net/viewtopic.php?t=10443
http://forums.cacti.net/viewtopic.php?t=13519

[fbrockerhoff]

Hello,

thank you for the links. It seems is didn't searched "got enough", sorry.

Regards,

Falk

[tktks]

I know this is a really old posting of the previous xml for 0.8.6g, but does anyone have any updated xml for Cisco 7200 Upstream SNR that works with the current version of CACTI 0.8.7.g?

Here's what I get when I tried the ones above and following the instructions, I get an the following error on import "+ Unmet Dependency: (Data Template)" on both the cacti_data_query_snmp_modems_per_upstreams.xml, and cacti_data_query_snmp_upstreams_snr.xml templates. I then cannot add the SNR Data sources. I get a Custom Data error that I cannot resolve. I go to Data Sources, then add, I can select the "Interface - Upstream SNR" Data Template and assign it to a host. After clicking on the "Create" button, I then get a screen with the Supplimental Data Template Data to be filled in. There is no Data Source Path filled in and no Output Type ID, no Index Value and no Index Type under the "Custom Data" part. The Output Type ID and Index Type lines have the following "Data query data sources must be created through New Graphs" on them. I cannot save past that point. Going into "New Graphs" and trying through that only "SNMP - FEC Upstream Graph Types is displayed and it gathers nothing. So I'm guessing alot has changed since 2005-2006 to get Cisco 7200vxrs Upstream to work?

Thanks