Looking for the template of netgear wag102

shanqianyu · Post by **shanqianyu** » Tue May 11, 2010 4:44 am

hi, all. I wanna manage our wireless devices(netgear wag102) by cacti. but I cannot get the template from Internet. Please tell me where I can get it. Thank you!

Sirup · Post by **Sirup** » Tue May 11, 2010 4:45 am

The question ist: What do you want to monitor?

shanqianyu · Post by **shanqianyu** » Tue May 11, 2010 5:28 am

i want to monitor netgear wag102.

Sirup · Post by **Sirup** » Tue May 11, 2010 5:54 am

Well, and what? The temperature? The uptime? The connections? The interface traffic?
Here is the MIB of the devices, there you can find out what is possible to monitor: http://www.oidview.com/mibs/4526/WG102-MIB.html

You could also try: http://forums.cacti.net/about20194.html

shanqianyu · Post by **shanqianyu** » Tue May 11, 2010 11:20 am

thank you very much. maybe i didn't say it exactly. yes, i want to monitor the traffics, cpu, memory and load. ok, i am going to test it. thank you again.

shanqianyu · Post by **shanqianyu** » Thu May 13, 2010 12:43 am

hi, i tried and failed. it couldn't draw with that template. and do you have other infomation about the templates of netgear wag102. i wanna monitor its cpu, traffic and memory of wag102

Sirup · Post by **Sirup** » Mon May 17, 2010 2:49 am

Traffic should be able to monitor with the default template SNMP - Interface Statistics.

Where do you fail? Which version of cacti do you use? Which polling mechanism+version? Which OS? Add Screenshots. Add error messages. Add cacti-logs. Add webserver logs. Add the outpot of the wrench next to the graphs. etc.etc.

Hyperlord · Post by **Hyperlord** » Mon May 17, 2010 3:06 am

Search the forums for Netgear, I use the template myself.

Sirup · Post by **Sirup** » Mon May 17, 2010 3:29 am

Sirup wrote: You could also try: http://forums.cacti.net/about20194.html

I posted him the template. Is this the same you suggested, Hyperlord?
He said he had troubles with that.

Hyperlord · Post by **Hyperlord** » Mon May 17, 2010 6:05 am

Hi Sirup,

ah way too early this morning

Yeah right that's the template I use. I imported all 4 XML files and have no problems at all.
You configured SNMP on the Netgear anyway and can snmpwalk the device? (AFAIK it's v1 only but I can make clear this afternoon).

kind regards,
Hyperlord

shanqianyu · Post by **shanqianyu** » Wed May 19, 2010 4:25 am

hi,all. I'm sorry about not replying in time. now my cacti is running on the centos 5.2. my cacti version is 0.8.7.e. the poller type is spine. when I import these templates, it shows success. then I added a device with these templates, however, it asked me output type ID, index value and index type when i created graphs. but I don't know those values and I don't care. at last, the picture didn't show. i wonder weather the template mathes the cacti 0.8.7 or some wrong settings i did. thank you in advance.

Hyperlord · Post by **Hyperlord** » Wed May 19, 2010 5:23 am

Hi,

oooohkay, strange, I will check my configuration this afternoon, can't remember I had to enter such infos ...

Anyway, you can snmpwalk the AP without errors?
-> snmpwalk -c public -v 1 NetGearIP

brgds

shanqianyu · Post by **shanqianyu** » Wed May 19, 2010 8:33 pm

morning. as you said, the cacti can snmpwalk the AP without errors, but there is also no any pictures about traffics, load and so on. ok, waiting for you!

BFS_Support · Post by **BFS_Support** » Wed Sep 15, 2010 6:57 am

I've been playing with getting our WAG102 access points to display on Cacti, and after a bit of editing of the WG102 templates I originally downloaded from here, I have them working.

Find XML files below

Hyperlord · Post by **Hyperlord** » Mon Oct 18, 2010 8:15 am

Thanks for sharing!

brgds

Cacti

Looking for the template of netgear wag102

Looking for the template of netgear wag102

Re: Looking for the template of netgear wag102

Who is online