rrdtool can't find it's own path???

[lithium338]

RRDTool Command:

C:/Program Files/EasyPHP5.2.10/www/cacti/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="test - Traffic - Et0/0" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Program Files/EasyPHP5.2.10/www/cacti/rra/test_traffic_in_16.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Program Files/EasyPHP5.2.10/www/cacti/rra/test_traffic_in_16.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf%s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf%s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf%s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf%s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf%s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf%s"

RRDTool Says:

'C:/Program' is not recognized as an internal or external command,

----------------------------------------------
just installed cacti tonight...i know snmp is working because it correctly identifies my cisco hardware and the active interfaces w/ MAC addy's and all. no Graphs at all are created, and NOTHING shows up. in debug mode for the graph i got the above output. seems like it should be a smiple fix, i've tried slashes both ways and it just can't seem to figure it out..... no rra files are created either.

[TheWitness]

No spaces please. Please use 8.3 notation if you have spaces.

TheWitness

[lithium338]

RRDTool Says:

ERROR: opening 'C:/Program Files/EasyPHP5.2.10/www/cacti/rra/test_traffic_in_16.rrd': No such file or directory


is what i get when i change to 8.3 notation in the PATH field in the settings tab....

[TheWitness]

Cacti can not presently be in any path with spaces

[BSOD2600]

... and this is why the installation guide explicitly has you install it in the default location. Yet another reason why NOT to use the various bundled php/mysql/apache installers.

[TheWitness]

... and this is why the installation guide explicitly has you install it in the default location. Yet another reason why NOT to use the various bundled php/mysql/apache installers.

Except yours

TheWitness

[BSOD2600]

My installer installs each component separately and in the locations/configs specified by the installation guide...

[TheWitness]

+1 follows directions