[XML] Alteon Virtual Server Session Counts

[Meier]

i think there should be a filedump ordered by manufacturer for this stuff. putting it in a forum is not very cool


<interface>
<name>Get Alteon Virtual Servers</name>
<description>Queries a Alteon loadbalance for a list of monitorable virtual servers</description>
<oid_index>.1.3.6.1.4.1.1872.2.1.8.2.7.1.1</oid_index>

<fields>
<vipIndex>
<name>Index</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.1872.2.1.8.2.7.1.1</oid>
</vipIndex>
<vipDescr>
<name>Description</name>
<method>walk</method>
<source>value</source>
<direction>input</direction>
<oid>.1.3.6.1.4.1.1872.2.1.5.10.1.7</oid>
</vipDescr>
<vipSessions>
<name>Sessions</name>
<method>walk</method>
<source>value</source>
<direction>output</direction>
<oid>.1.3.6.1.4.1.1872.2.1.8.2.7.1.2</oid>
</vipSessions>
</fields>
</interface>

[ptsiaras]

Hi
I try to import the xml but is not working.
Can you post it again ?

[Guest]

anyone get this to work?

[gandalf]

<oid_index>.1.3.6.1.4.1.1872.2.1.8.2.7.1.1</oid_index>

Hi,

just tried to figure out your problem. But our Alteons won't tell me anything in MIB tree .1.3.6.1.4.1.1872.2.1. snmpwalk shows data for that?

Reinhard

[TFC]

I can see the index, description and when I change from output to input, I can read data in queries page.After that I change as output.
but when I create a graph no data returns

[shekharlondhe]

Hi there,
I am a new member to this group and i am searching for some information on Alteon AWS switches related to sessions on individual interfaces. I thought posting this message here might give me some information.
I am facing a problem in displaying the active sessions present on a particular interface present on an Alteon AWS Switch. The OID that I am using is 1.3.6.1.4.1.1872.2.5.4.2.1.5.1.3, but when i try to browse the mib dump of a Alteon AWS Switch, using this OID i just get 2 values where as the number of interfaces present on the switch are 7.
Can anyone let me know whether i am using the correct OID for pinging the sessions or else there is some other OID which i should use.

Regards,
Shrek