cisco 3600 voice port usage

[amirh]

dear all
I have cisco 3600 with 24 fxo port and service debit voip but I cant create online user graph usage .

help me to solved this trouble

[BSOD2600]

Find out where it's breaking http://docs.cacti.net/manual:088:4_help ... #debugging

[amirh]

I'm beginner in cacti,I just config SNMP and add it into cacti .
can help me step by step. I have other cisco 1760 with FXO port with same problem

[gandalf]

The link IS step-by-step. Just try to follow it and post results of each step if you can't interpret it on your own
R.

[amirh]

this is my cacti.log result :
04/23/2010 11:50:03 PM - CMDPHP: Poller[0] Host[7] DS[63] WARNING: Result from SNMP not valid. Partial Result: U
04/23/2010 11:50:03 PM - CMDPHP: Poller[0] Host[8] DS[68] WARNING: Result from SNMP not valid. Partial Result: U
04/23/2010 11:50:04 PM - SYSTEM STATS: Time:2.2400 Method:cmd.php Processes:1 Threads:N/A Hosts:11 HostsPerProcess:11 DataSources:115 RRDsProcessed:79


I don't have any Perl File and don't have enough knowledge on MIB's

[gandalf]

The "U" tells you, that there is a problem querying the target device with a specific SNMP request. When switching to DEBUG mode, cacti will tell you the OID used. You may then verify, whether the target is failing or whether it's Cacti's fault.
I suppose that the target does not support that specific query
R.