What is the best steps to graph an extrenal OID

[atheeralattar]

Hi All,

I knew that cacti not dealing with the MIB files so I extracted my OIDs from the MIB file I have and now I wanna know what is the best steps to get these OIDs graphed.

[Linegod]

http://docs.cacti.net/manual_old:087:ad ... data_input

[atheeralattar]

http://docs.cacti.net/manual_old:087:ad ... data_input

Dear Lieold,

I did the steps above, but i still getting an empty graphs, I have Rydayn modem and the test OID I want to test with is the EbNO value which is changing all the time.

here is the steps I did.
1- Added the device.
2- Added graph for that device
3- Data source is a Generic SNMP OID
4- pasting the OID into the OID field.

and for the data input methods, shall I create my own one, and if so which one is the preferred in this case?

thanks Alot.

Atheer

[BSOD2600]

Not a windows specific question, moving.

Use http://docs.cacti.net/manual:088:4_help.2_debugging to troubleshoot what process is breaking.

[atheeralattar]

I tried to debug the snmp, and this is what I got

C:\Documents and Settings\Admin>snmpget -c public -v 2c 189.203.104.4 .1.3.6.1.4
.1.2591.15.1.4.13.0
Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 1 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none)
SNMPv2-SMI::enterprises.2591.15.1.4.13.0 = INTEGER: 7

Thanks

[gandalf]

These errors are SNMP agent errors complaining about bad MIB files.
That does not disturb cacti. But it is time-consuming. It is better not to parse MIBs at all; cacti does not need that.

For more debugging, please see 2nd link of my sig
R.

[atheeralattar]

These errors are SNMP agent errors complaining about bad MIB files.
That does not disturb cacti. But it is time-consuming. It is better not to parse MIBs at all; cacti does not need that.

For more debugging, please see 2nd link of my sig
R.

There is no links in your sig:-)

[TheWitness]

I see 5 links.

TheWitness