Nortel devices

[mfaisal_i]

Salam,

I have researched and found nortel 8600 buffer utilization, cpu utilization, switch fabric and temperature, kindly can some one share for broadcast and unicasts of it


and same buffer utilization, cpu utilization, switch fabric, temperature, broadcast and unicasts i need for nortel 1624 and nortel 425 and nortel 2526 switches ... please share as soon as possible.


Regards,
M. Faisal.

[jackey]

Salam,

I have researched and found nortel 8600 buffer utilization, cpu utilization, switch fabric and temperature, kindly can some one share for broadcast and unicasts of it


and same buffer utilization, cpu utilization, switch fabric, temperature, broadcast and unicasts i need for nortel 1624 and nortel 425 and nortel 2526 switches ... please share as soon as possible.


Regards,
M. Faisal.

Hi M.Faisal

I am also looking for like you, and you have the 8600 on the monitoring of multicast do?

[BorisL]

{Uni|Broad|Multi}cast packet rate should not be a problem. Addon for interface.xml:

Code: Select all

                <ifHCInUcastPkts>
                        <name>Unicast Packets In - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.7</oid>
                </ifHCInUcastPkts>
                <ifHCInMulticastPkts>
                        <name>Multicast Packets In - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.8</oid>
                </ifHCInMulticastPkts>
                <ifHCInBroadcastPkts>
                        <name>Broadcast Packets In - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.9</oid>
                </ifHCInBroadcastPkts>
                <ifHCOutUcastPkts>
                        <name>Unicast Packets Out - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.11</oid>
                </ifHCOutUcastPkts>
                <ifHCOutMulticastPkts>
                        <name>Multicast Packets Out - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.12</oid>
                </ifHCOutMulticastPkts>
                <ifHCOutBroadcastPkts>
                        <name>Broadcast Packets Out - 64-bit Counters</name>
                        <method>walk</method>
                        <source>value</source>
                        <direction>output</direction>
                        <oid>.1.3.6.1.2.1.31.1.1.1.13</oid>
                </ifHCOutBroadcastPkts>

[mfaisal_i]

Thanks for sharing but can you also share ..

buffer utilization, cpu utilization, switch fabric, temperature for nortel 1624 and nortel 425 and nortel 2526 switches


Regards,
M.Faisal.

[BorisL]

Actually I can not since I have no Nortel equipment at all.
Graph template I posted is based on generic MIB that should be supported on every sane hardware.

[mfaisal_i]

How can i get this OID and MIB from nortel switches.


Regards,
M. Faisal.