what problem with my graph

cadoi · Post by **cadoi** » Mon Mar 22, 2010 5:07 am

what problem with my graph?
I also read this page http://docs.cacti.net/manual:088:4_help ... #debugging but can't understand this bug?

BSOD2600 · Post by **BSOD2600** » Mon Mar 22, 2010 9:22 am

using snmpv2 and 64bit graph templates?

cadoi · Post by **cadoi** » Mon Mar 22, 2010 9:54 pm

Hi
BSOD2600

using snmpv2 and 64bit graph templates?

yes, I used snmp v2 and 64 bit graph template

My configuration are:

BorisL · Post by **BorisL** » Tue Mar 23, 2010 1:52 am

Are there any strange lines in log when this gap appears?
Do you use boost plugin? Which version?

cadoi · Post by **cadoi** » Tue Mar 23, 2010 2:24 am

Are there any strange lines in log when this gap appears?

No

Do you use boost plugin? Which version?

No, i don't

BSOD2600 · Post by **BSOD2600** » Tue Mar 23, 2010 9:26 am

I think you might have so much traffic, the 64bit counters are wrapping too. Check by turning the cacti logging level to medium and watching what gets returned for the problem device.

cadoi · Post by **cadoi** » Tue Mar 23, 2010 10:28 pm

I think you might have so much traffic, the 64bit counters are wrapping too. Check by turning the cacti logging level to medium and watching what gets returned for the problem device.

yes,
63 devices
1290 graph

my server is
2 x 3.4G
ram 1G
RHEL 5.1

Is this ready for?
thanks for your support

wykk · Post by **wykk** » Wed Mar 24, 2010 3:47 pm

How long is your polling period taking?

cadoi · Post by **cadoi** » Wed Mar 24, 2010 8:16 pm

How long is your polling period taking?

I use 1 minute polling

wykk · Post by **wykk** » Thu Mar 25, 2010 4:08 pm

have you checked yours logs to see how long it's actually taking to finish your polling period?

if you're polling every 60 seconds, but it actually takes longer than 60 seconds to finish, you'll get gaps like that.

I know I have... and switching to spine fixed it.

cadoi · Post by **cadoi** » Thu Mar 25, 2010 8:29 pm

I still used spine
Now i change to 5 minutes polling but have two result difference.
One graph not gap but other still gap.
two graphs:

Post by **TheWitness** » Thu Mar 25, 2010 9:42 pm

What's going on in your Cacti Log? Is RRDtool Segfaulting? 64bit counters take forever to wrap, btw.

TheWitness

cadoi · Post by **cadoi** » Fri Mar 26, 2010 4:10 am

I have check one file with rrdtool info: the result in the test.txt
and the graph below:

what problem with my graph:

Post by **TheWitness** » Fri Mar 26, 2010 5:01 am

How can I answer your question when you don't answer mine?

cadoi · Post by **cadoi** » Sat Mar 27, 2010 8:29 pm

Is RRDtool Segfaulting

I don't know what does this mean? because of miss understand the word "Segfaulting"

What's going on in your Cacti Log

How do i check with one interface in exactly time?

thanks for your supports

what problem with my graph

what problem with my graph

Who is online