No data in graphs

[Sumo]

Hi,

Cacti 0.87e installed on W2K3 server with 1.2.30 rrdtool.
The graphs are here but without any information.
poller.php works every min with the windows scheduler

here is the output in the cacti log :
02/01/2010 10:50:12 AM - CMDPHP: Poller[0] Time: 8.4948 s, Theads: N/A, Hosts: 1
02/01/2010 10:50:12 AM - CMDPHP: Poller[0] Host[5] DS[32] SNMP: v1: server1, dsname: hdd_used, oid: , output: U
02/01/2010 10:50:12 AM - CMDPHP: Poller[0] Host[5] DS[32] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:12 AM - CMDPHP: Poller[0] Host[5] DS[31] SNMP: v1: server1, dsname: cpu, oid: , output: U
02/01/2010 10:50:12 AM - CMDPHP: Poller[0] Host[5] DS[31] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Time: 0.3292 s, Theads: N/A, Hosts: 1
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[41] SNMP: v2: RMFRTASA002, dsname: cpu_system, oid: .1.3.6.1.4.1.2021.11.52.0, output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[41] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[36] SNMP: v2: RMFRTASA002, dsname: hdd_used, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[36] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[35] SNMP: v2: RMFRTASA002, dsname: hdd_used, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[35] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[24] SNMP: v1: RMFRTASA002, dsname: hdd_total, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[24] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Time: 0.2261 s, Theads: N/A, Hosts: 1
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[7] DS[43] SNMP: v2: RMFRTASA003, dsname: cpu, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[23] SNMP: v1: RMFRTASA002, dsname: cpu, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[7] DS[43] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[6] DS[23] WARNING: Result from SNMP not valid. Partial Result: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[7] DS[30] SNMP: v2: RMFRTASA003, dsname: proc, oid: .1.3.6.1.2.1.25.1.6.0, output: 29
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[7] DS[28] SNMP: v1: RMFRTASA003, dsname: hdd_total, oid: , output: U
02/01/2010 10:50:04 AM - CMDPHP: Poller[0] Host[7] DS[28] WARNING: Result from SNMP not valid. Partial Result: U

Pls help needed
thanks

[TheWitness]

There are no OID's associated with your Data Templates. This is the source of the problem. How you got there, I don't know.

TheWitness

[stalingrad89]

How do you know he doesn't any OID associated ?

I may have the same problem.