weird issue with graph tittle

[marbeli]

Hello humans,

I have this weird problem that I never had before. When I add a new graph, the title is all messed up and not respecting the tittle in my graph template.

Now if I check "Use Per-Graph Value (Ignore this Value)" and wait one cycle then remove the check, the right title is displayed on my graph.

any idea what this could be?

thankyou

[BSOD2600]

Earthling,

Post a picture of the graph template, graph via graph management and the graph debugging output.

[marbeli]

here it is.

this is the debug output:

RRDTool Command:

C:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="CDP-DS-SW-S18-02 - Traffic - GigabitEthernet/28" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="Bits per second" \
--slope-mode \
--font TITLE:10: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Apache2/htdocs/cacti/rra/10/728.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Apache2/htdocs/cacti/rra/10/728.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s\n"

RRDTool Says:

OK

[marbeli]

by the way, there is no data because I just created the graph, otherwise this is not the problem, only the title.

[marbeli]

this is what my graph title usualy looks like

[gandalf]

On a data query, the title is usually governed by the "Suggested Names" section of that data query. Find it explained at http://docs.cacti.net/manual:087:3a_adv ... data_query
R.

[marbeli]

it solves the problem if I edit the suggested title in data queries. But it still doesn't work properly because I shouldn't have to do that if it is specified in the graph template.