Report plugin ''ReportIt" - v0.7.5a (released 23/12/11)

[JorisFRST]

Hi,

I have a small issue, all reports work fine, but only when run by cron or from command line for the sheduled reports I get an error. (ran daily with debug on) :

write(1, "[", 1) = 1
write(1, "ON:service_state", 16) = 16
write(1, "] => ", 5) = 5
write(1, "\n", 1) = 1
write(1, ")\n", 2) = 2
write(1, "\n", 1) = 1
write(1, "\n\t\t******* Defined Cache -> Meas"..., 57) = 57
write(1, "Array\n", 6) = 6
write(1, "(\n", 2) = 2
write(1, ")\n", 2) = 2
write(1, "\n", 1) = 1
poll([{fd=4, events=POLLIN|POLLPRI}], 1, 0) = 0 (Timeout)
write(4, "N\0\0\0\3select name,data_source_pat"..., 82) = 82
read(4, "\1\0\0\1\2I\0\0\2\3def\7cactidb\22data_templ"..., 16384) = 317
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
time(NULL) = 1256225893
stat64("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2944, ...}) = 0
time(NULL) = 1256225893
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++
[root@cacticentos src]#


Works perfectly from the "run report" in cacti.

rrdtool 1.3.8.2 from dag repository, recompiled php-bindings from rpm and from source with php5.1.6 always the same error.

Any ideas other then run the manually from now ? I know this is not a reportit error, but maybe someone else saw this before.

P.S. Love reportit, still learning, but it's quite powerfull !

[browniebraun]

Hi,

I'm attempting to create a total of all traffic pushed on each interface inside the report period - so far I haven't managed to get anything that seems to resemble what Cacti graphs report the interfaces are doing; could anyone tell me how I would go about this?


Cheers,

Which formula are you using?

Best regards
-Andreas-

[browniebraun]

Hi,

I have a small issue, all reports work fine, but only when run by cron or from command line for the sheduled reports I get an error. (ran daily with debug on) :

......

Works perfectly from the "run report" in cacti.

rrdtool 1.3.8.2 from dag repository, recompiled php-bindings from rpm and from source with php5.1.6 always the same error.

Any ideas other then run the manually from now ? I know this is not a reportit error, but maybe someone else saw this before.

P.S. Love reportit, still learning, but it's quite powerfull !

Loading the rrdtool bindings as a shared library won't work faultlessly in combination with PHP 5 and Linux in that case. You have to recompile PHP with the bindings for RRDtool as an embedded module.
Here's a good description how to do this: http://www.ioncannon.net/system-adminis ... n-by-hand/

Best regards
-Andreas-

[JorisFRST]

Hi,

I have a small issue, all reports work fine, but only when run by cron or from command line for the sheduled reports I get an error. (ran daily with debug on) :

......

Works perfectly from the "run report" in cacti.

rrdtool 1.3.8.2 from dag repository, recompiled php-bindings from rpm and from source with php5.1.6 always the same error.

Any ideas other then run the manually from now ? I know this is not a reportit error, but maybe someone else saw this before.

P.S. Love reportit, still learning, but it's quite powerfull !

Loading the rrdtool bindings as a shared library won't work faultlessly in combination with PHP 5 and Linux in that case. You have to recompile PHP with the bindings for RRDtool as an embedded module.
Here's a good description how to do this: http://www.ioncannon.net/system-adminis ... n-by-hand/

Best regards
-Andreas-

I did this on the test box, then copied the .so over to the live one, I guess that's not enough then? I will wait for a php5 release for the rrdtool binding then, don't want to recompile php on the live box.

Thank you,

Joris.

[browniebraun]

.....
I did this on the test box, then copied the .so over to the live one, I guess that's not enough then? I will wait for a php5 release for the rrdtool binding then, don't want to recompile php on the live box.

Thank you,

Joris.

Till now I haven't found a special release for PHP 5 yet, but if you find a solution let us know.

Best regards
-Andreas-

[sh0x]

Hi I'm following the introduction document to create my first report and I'm wondering why wouldn't I have a maxValue variable for my traffic report? I have the others, nan, step, c1v, but no maxValue!
What am I doing wrong? Thanks!

[sh0x]

Hi I found the answer a few posts back. Thanks!

Mmmh, I never thought about that. I'll try to allocate some time next weekend to proof which changes are necessary to support that.
I also fixed a bug some days ago which will occur with data source items selected individually. See http://forums.cacti.net/viewtopic.php?p=164770#164770. So 0.7.3 will come.

Best regards
-Andreas-

If you could find some time that would be awesome!!!

Many Thanks!!


Jim

Hi Jim!

Edit your data template, tick "Use Per-Data Source Value" and put a value in the field that is higher than zero. I know it will be ignored by Cacti, but used by ReportIt if the Ifspeed / IfHighSpeed won't be found during the calculation. Then you can use the maxValue variable within your formula!

Best regards
-Andreas-

[derklugewolf]

I have the same issue with reportit as linux-support wrote:
I'm attempting to create a total of all traffic pushed on each interface inside the report period - so far I haven't managed to get anything that seems to resemble what Cacti graphs report the interfaces are doing; could anyone tell me how I would go about this?

I'm using the Default Traffic Template rev.0.1. How can I caculate and create the summery of used bandwidth on each interface? All I treid ended with wrong values.

Any help would be appriciated.

@lex

[derklugewolf]

Hi,
today I figured it out. Some earlier posts and many tries brings me into the right direction.

For me the solution is f_sum*60. This differs to the other calculation in this thread. The step size in the step var is not correct on my cacti reportit installation, whyever. step has to be 60 (seconds) but the var is 17280!?
With the right step value of 60 all works fine.

Do somebody have an idea why my step value is 17280 not 60?

Thanks for this great tool, awesome work. Only hard to find the right info/docu.

@lex

[browniebraun]

Hi,
today I figured it out. Some earlier posts and many tries brings me into the right direction.

For me the solution is f_sum*60. This differs to the other calculation in this thread. The step size in the step var is not correct on my cacti reportit installation, whyever. step has to be 60 (seconds) but the var is 17280!?
With the right step value of 60 all works fine.

Do somebody have an idea why my step value is 17280 not 60?

Thanks for this great tool, awesome work. Only hard to find the right info/docu.

@lex

We have to analyse this,
but at the moment I'm totally busy with the renovation of my house.
Hopefully I will have some time left next week. Sorry.

Best regards
-Andreas-

[derklugewolf]

Hello Andreas,
thanks for your info.

Yesterday I found the failure in cacti and my brain
For some testing reasons for a billing solution I changed the rra row size for daily and weekly data sources in cacti.
This will end up in wrong messures in cacti's graphs and total confusion to me. Sorry.
setting back the rra row size to default falues fixed it.

So problem is solved and f_sum*step is the right calculation.

Regards

@lex

[alex_gao]

Hi Andreas,

Can you offer me the 'patch_reportit_v071_mysql4.tar.gz'?
Because I have installed cacti 0.8.7e on CentOS 4.5 with Mysql4.
It seems that reportit_v061 cannot be installed on cacti 0.8.7e, right?

Following is my email & MSN:
Email Address: Alex.Gao@bertelsmann.com.cn
MSN: Alex_M_Gao@hotmail.com

BR,

Alex

[alex_gao]

The problem is solved, I'm so idiot!

[ebini]

Hi,

have i missunderstood the feature "Auto Generated Data Items" in report configuration?
I want to automatically add the dataitems to my report.

I set Report Configuration -> "Data Item Presets" -> Data Items Filter (optional) to "l%" <- i wannt all hosts with host description startin "l" (for linux p.e.)

Administration -> Scheduled Reporting:
* enabled is checked
* Auto Generated Data Items is checked,
* daily report is set.

=> starting report via cron/command-line:
i get an error: "REPORTIT ERROR: No data items defined."

(remark: when i use "add data item", i see my filter and all hosts starting with "l")

Thanks in advance....

ebini

[browniebraun]

Sounds like a bug. I'll have to check this.
Which version of ReportIt are you using?

Best regards
-Andreas-