nmidUpDownMonitor v0.6a released
Moderators: Developers, Moderators
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
nmidUpDownMonitor v0.6a released
It's a simple plugin that sends an email alert once a device gets down. Uppon recoverry of the device, a "host up" alert is sent out containing the duration of the downtime and the time the host came up again.
Notifiction emails are configured on a per host basis.
Now also includes Interface Down/Up detection based on the Interface Status template. Each interface can send an alert to pre-configured email addresses.
You can download the latest version from the Project Page
In case you want to have some sofisticated alerting, use Manage or Thold plugin instead.
Notifiction emails are configured on a per host basis.
Now also includes Interface Down/Up detection based on the Interface Status template. Each interface can send an alert to pre-configured email addresses.
You can download the latest version from the Project Page
In case you want to have some sofisticated alerting, use Manage or Thold plugin instead.
Last edited by phalek on Tue Aug 25, 2009 8:13 am, edited 1 time in total.
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
NmidUpDownMonitor
Hi Thomas,
I'm urgently need your help. Please reply.
I'm urgently need your help. Please reply.
Hi,
after install and enable the following two errors come up :
Notice: Undefined variable: where_clause in /usr/local/cacti/plugins/nmidUpDownMonitor/nmidUpDownMonitor_InterfaceMonitor.php on line 64
and
Notice: Undefined index: nmidUpDownMonitor_InterfaceMonitor.php: in /usr/local/cacti/lib/functions.php on line 1743
Are there any fixes for these problems?
I'am using cacti 0.8.7e and pia 2.5
kindly regards,
Ralf Kirmis
after install and enable the following two errors come up :
Notice: Undefined variable: where_clause in /usr/local/cacti/plugins/nmidUpDownMonitor/nmidUpDownMonitor_InterfaceMonitor.php on line 64
and
Notice: Undefined index: nmidUpDownMonitor_InterfaceMonitor.php: in /usr/local/cacti/lib/functions.php on line 1743
Are there any fixes for these problems?
I'am using cacti 0.8.7e and pia 2.5
kindly regards,
Ralf Kirmis
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Hi Ralf,
your're talking about the apache error log, i guess.
I try to make these errors go away, but they do not harm the functionality of the plugin itself.
I'm going to upload a newer version this evening ( 20:00 GMT +2 ). The current version is only able to monitor interface status of cisco devices.
your're talking about the apache error log, i guess.
I try to make these errors go away, but they do not harm the functionality of the plugin itself.
I'm going to upload a newer version this evening ( 20:00 GMT +2 ). The current version is only able to monitor interface status of cisco devices.
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Download the 0.6a update fixing the problem from here:
http://redmine.nmid-plugins.de/projects ... ownmonitor
Your will need to install/enable the storeLastPoll plugin as well.
http://redmine.nmid-plugins.de/projects ... ownmonitor
Your will need to install/enable the storeLastPoll plugin as well.
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Hi Ralf,
The plugin adds a new field to the hosts called "Notificiation Email". If that field is set, that specific host will be monitored and an alert mail will be send to the email configured there.
For the interfaces:
You will need to graph the Interface Status template from here and configure it for your interfaces you want to monitor. Then wait for one polling cycle and all interfaces you had the Interface Status template configured will show up under the "Setup Interface Alerts" link.
you can then go on configureing the links.
See the screenshot below for the interface list.
The plugin adds a new field to the hosts called "Notificiation Email". If that field is set, that specific host will be monitored and an alert mail will be send to the email configured there.
For the interfaces:
You will need to graph the Interface Status template from here and configure it for your interfaces you want to monitor. Then wait for one polling cycle and all interfaces you had the Interface Status template configured will show up under the "Setup Interface Alerts" link.
you can then go on configureing the links.
See the screenshot below for the interface list.
- Attachments
-
- interface_status_page.png (72.05 KiB) Viewed 18453 times
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
-
- Posts: 15
- Joined: Thu Jan 21, 2010 3:11 am
Re: nmidUpDownMonitor v0.6a released
Nice plugin. Thank you
Re: nmidUpDownMonitor v0.6a released
Hi phalek:
I installed your plugin (version 0.7) on my cacti (0.8.7g), all was ok, but in "Setup Interface Alerts" I see each interface duplicated (look at the attached image). Could you take a look?. By the way, I had to install StoreLast poll plugin.... is it necessary?.
Thanks in advance..
Joseme
I installed your plugin (version 0.7) on my cacti (0.8.7g), all was ok, but in "Setup Interface Alerts" I see each interface duplicated (look at the attached image). Could you take a look?. By the way, I had to install StoreLast poll plugin.... is it necessary?.
Thanks in advance..
Joseme
- Attachments
-
- nmidupdown.JPG (42.07 KiB) Viewed 14997 times
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Re: nmidUpDownMonitor v0.6a released
Yes, storeLastPoll is necesarry.
Btw. you can also use Thold to achieve the same results, just add an appropriate threshold to the interfaces.
Btw. you can also use Thold to achieve the same results, just add an appropriate threshold to the interfaces.
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Re: nmidUpDownMonitor v0.6a released
Hi:
This is my first time istalling nmidUpDownMonitor, I have installed 0.7 and do not seeany errors. I have added the email to the devices that I want to monitor, but my interface list is blank. Sorry But, am I Missisng something ????
Thanks
This is my first time istalling nmidUpDownMonitor, I have installed 0.7 and do not seeany errors. I have added the email to the devices that I want to monitor, but my interface list is blank. Sorry But, am I Missisng something ????
Thanks
- Attachments
-
- Capture.PNG (5.45 KiB) Viewed 14653 times
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Re: nmidUpDownMonitor v0.6a released
HI Zoemu, you will also need to add/import the Interface status template from here: http://forums.cacti.net/about17722.html
Then add the query to your network switches/ports you want to monitor. These interfaces then show up within the page.
Then add the query to your network switches/ports you want to monitor. These interfaces then show up within the page.
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
-
- Posts: 40
- Joined: Sun Oct 21, 2012 10:42 pm
Re: nmidUpDownMonitor v0.6a released
Do you have any plans to make this plugin compatible with new Cacti 1.X.
Thanks
Thanks
- phalek
- Developer
- Posts: 2838
- Joined: Thu Jan 31, 2008 6:39 am
- Location: Kressbronn, Germany
- Contact:
Re: nmidUpDownMonitor v0.6a released
Thold should/can be doing this as well when using the Status template from here http://forums.cacti.net/about17722.html
Unless there's something specifc about this which you require ? It should be fairly easy to migrate, but it's not a very high priority ....
Unless there's something specifc about this which you require ? It should be fairly easy to migrate, but it's not a very high priority ....
Greetings,
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Phalek
---
Need more help ? Read the Cacti documentation or my new Cacti 1.x Book
Need on-site support ? Look here Cacti Workshop
Need professional Cacti support ? Look here CereusService
---
Plugins : CereusReporting
Re: nmidUpDownMonitor v0.6a released
Hi, I am new to posting on this forums. But I have used a lot when configuring cacti.
I recently install nmidUpDownMonitor_v0.70 and storeLastPoll_0.8 pluging on cacti. manage to configure reading this forum.
(I know this is a newer version but coudnt find any forum related to this version)
My Problem is after configuring everything I manage to get alert emails to my self. but when I go to "Setup Interface Alerts" page status showing unknown. also there are no data on graph. I have attached some picture for referance.
I recently install nmidUpDownMonitor_v0.70 and storeLastPoll_0.8 pluging on cacti. manage to configure reading this forum.
(I know this is a newer version but coudnt find any forum related to this version)
My Problem is after configuring everything I manage to get alert emails to my self. but when I go to "Setup Interface Alerts" page status showing unknown. also there are no data on graph. I have attached some picture for referance.
- Attachments
-
- cacti 3.JPG (29.34 KiB) Viewed 9801 times
-
- cacti 2.JPG (31.83 KiB) Viewed 9801 times
-
- cacti 1.JPG (30.99 KiB) Viewed 9801 times
Who is online
Users browsing this forum: No registered users and 0 guests