Data in weekly graph drops off after 2 1/2 days

[davenport]

Have old graphs on system running great . had a disk space issue some on tweaked something now weekly and mothly graph dont diplay mor than 2 1/2 days off data. any ideas ?

[TheWitness]

You must be very specific. What do you mean by "tweaks". Again, be very specific.

TheWitness

[davenport]

Tweak is defined as did something told no one and left. This is my Issue.

I now know that when you set up a rrd it is filled with unknow data that is switched out for know but never grows in size. Knowing this what variable contols the size of the rrd in age. I have weekly and monthly graphs that show a week and a month but the data only shows 2 1/2 days of collored graph the rest is blank. if the rrd was bigger would not the graph give me more days of results.

I see as the solution i change a variable make a new graph and presto in a moth i have all the data i need.

This is the source for my graph i don't see the variable here it must be in the GUI but where.



/usr/local/rrdtool-1.0.39/bin/rrdtool graph - \
--imgformat=PNG \
--start="-1382400" \
--title="PAIX - Primary 5:3" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--vertical-label="MegaBytes Per Second" \
DEF:a="/home/www/cacti/rra/66_201_32_1_5003_in.rrd":66_201_32_1_5003_in:AVERAGE \
DEF:b="/home/www/cacti/rra/66_201_32_1_5003_out.rrd":66_201_32_1_5003_ou:AVERAGE \
CDEF:cdefa=a,9,* \
CDEF:cdefe=b,9,* \
AREA:cdefa#00CF00:"Inbound" \
GPRINTLAST:" Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97:"Outbound" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s"

Thanks for any Help,
David Miller