re-alert doesnt work

herjai · Post by **herjai** » Mon Jul 27, 2009 3:27 am

Here are the files

mcutting · Post by **mcutting** » Mon Jul 27, 2009 3:32 am

Ok

Those are from a REALLY old version. Please replace those files with the enclosed. Try and perform a verbose query from any of the hosts, and let me know how you get on.

Regds

herjai · Post by **herjai** » Mon Jul 27, 2009 3:44 am

sorry which TYPE of query should i find those at??

coz at my old cacti, i have installed a "Data Query [ucd 10 fs] " which will query harddisk and memory usage, is that what i am looking for at the new one too?

mcutting · Post by **mcutting** » Mon Jul 27, 2009 3:46 am

Hmm - are you using UCD to query a Windows host ? If so, this won't work. You should be using "SNMP - Get Mounted Partitions".

herjai · Post by **herjai** » Mon Jul 27, 2009 3:50 am

when i do a query on it, it return 0 rows like this, please kindly have a look

mcutting · Post by **mcutting** » Mon Jul 27, 2009 4:03 am

Do you get anything back if you change the SNMP version from 2 to 1 ?
Also, did you replace those files ?

Thanks

herjai · Post by **herjai** » Mon Jul 27, 2009 4:08 am

i replaced the files already,

and getting same result if i change it back to snmp v1

mcutting · Post by **mcutting** » Mon Jul 27, 2009 4:09 am

Go to System Utilities / Rebuild Poller Cache

Try the same again

herjai · Post by **herjai** » Mon Jul 27, 2009 4:12 am

hmm, i rebuild cache and try for both snmp1 and 2, both no luck

mcutting · Post by **mcutting** » Mon Jul 27, 2009 4:13 am

Also, please have a look at this
http://forums.cacti.net/viewtopic.php?t=23925

herjai · Post by **herjai** » Mon Jul 27, 2009 4:22 am

IT WORKED!!!!!!!!!!!!

thanks alot guys

mcutting · Post by **mcutting** » Mon Jul 27, 2009 4:26 am

Ok. Could you change the title of your original post to include [SOLVED] at the start ? This makes it easy for others to see that this has been resolved.

Thanks

herjai · Post by **herjai** » Mon Jul 27, 2009 5:08 am

one more last question, at the threshold template, which template should i use? when i choose MIB - hdd used, the hd usage is always 100% triggering all my treshold, also the win service is always 0 even the service is up

mcutting · Post by **mcutting** » Mon Jul 27, 2009 5:12 am

which template should i use? when i choose MIB - hdd used, the hd usage is always 100% triggering all my treshold

Have a look in the Threshold forum for this one. You'd ideally need to define a template and use PERCENTAGES for this to work.

also the win service is always 0 even the service is up

Guaranteed that this is an issue with the OID being truncated as per my pervious post. Have a look through the link in order to resolve it.

herjai · Post by **herjai** » Mon Jul 27, 2009 5:59 am

i got the % working finally, thanks, for the win services, where may i get your post that talks about it? sorry for all these inconvenience that caused you

Cacti

re-alert doesnt work

Who is online