re-alert doesnt work

mcutting · Post by **mcutting** » Thu Jul 23, 2009 3:30 am

Wait a minute....

You are using WAMP right ?? Could you please send me your php.ini file. There are TWO on WAMP - I need to see both.

Thanks

mcutting · Post by **mcutting** » Thu Jul 23, 2009 3:34 am

Also, did you install NET-SNMP, or are you using the php-snmp extension ? If you didn't install NET-SNMP, you''ll need to enable this extension in WAMP.

Also, make sure that your WAMP settings look like the enclosed screen shot

herjai · Post by **herjai** » Thu Jul 23, 2009 3:48 am

I am using Net-snmp

herjai · Post by **herjai** » Thu Jul 23, 2009 3:49 am

this one is in php folder

mcutting · Post by **mcutting** » Thu Jul 23, 2009 3:55 am

Change these values in both php.ini files

register_argc_argv = on
magic_quotes_gpc = on
enable php_snmp extension in both php.ini files

Restart WAMP

mcutting · Post by **mcutting** » Thu Jul 23, 2009 3:56 am

Is CACTI running on the same server you are attempting to query ?

If so, download a copy of GetIF, and see if you can successfully walk the OID trees. If not, this is related to SNMP.

herjai · Post by **herjai** » Thu Jul 23, 2009 4:08 am

mcutting wrote:Change these values in both php.ini files

register_argc_argv = on
magic_quotes_gpc = on
enable php_snmp extension in both php.ini files

Restart WAMP

i enabled the argc and magic quote already, but how to enable the php_snmp and restart WAMP?

sorry about all these questions

herjai · Post by **herjai** » Thu Jul 23, 2009 4:09 am

and cacti and the server i trying to query is on different server

mcutting · Post by **mcutting** » Thu Jul 23, 2009 4:12 am

herjai wrote:
mcutting wrote:Change these values in both php.ini files

register_argc_argv = on
magic_quotes_gpc = on
enable php_snmp extension in both php.ini files

Restart WAMP
i enabled the argc and magic quote already, but how to enable the php_snmp and restart WAMP?

sorry about all these questions

No worries.

It's easier if you do this from the WAMP console.

1. Start the WAMPSERVER console (START / PROGRAMS / WampServer / Start WampServer)
2. In the system tray, click the WAMPServer icon once
3. Choose PHP / PHP Extensions / php-snmp
4. WAMP will automatically restart the services

mcutting · Post by **mcutting** » Thu Jul 23, 2009 4:13 am

herjai wrote:and cacti and the server i trying to query is on different server

Ok, so is there anything in between these two devices that may cause problems ? For example, Firewall, NAT device, router etc ?

Are you able to query the CACTI server directly with SNMP from CACTI ?

herjai · Post by **herjai** » Thu Jul 23, 2009 4:31 am

i have done the php-snmp thing, actually it's already enabled

and when i quest the localhost, same result

really really appreciated for your great helps

mcutting · Post by **mcutting** » Thu Jul 23, 2009 4:33 am

Can you please post your PATHS from settings ?

Thanks

herjai · Post by **herjai** » Thu Jul 23, 2009 4:36 am

here u go buddy

mcutting · Post by **mcutting** » Thu Jul 23, 2009 4:37 am

Now do System Utilities / Rebuild Poller Cache

Try it again..

herjai · Post by **herjai** » Thu Jul 23, 2009 4:41 am

rebuilt, and tried the verbose again right? same result

Cacti

re-alert doesnt work

Who is online