Windows Processor

[Lit]

Needs the standard SNMP Informant agent from http://www.snmp-informant.com/



% DPC Time
% Interrupt Time
% Privileged Time
% Processor Time
% User Time


First time own graph so......

[mduran]

I can´t import the templates!!!

could you try to post again ?

Tnks

[Lit]

Exported Graph Template including dependencies

[balint]

Hi! thanks for all, BUT
'cacti-home'/resource/snmp_queries/Lit_Cacti_NFO_STD_Processor.xml
file is missing!

Can you post it to here?

[Lit]

Try this.

[DevilSun]

Could you post a screenshot of the graph please Lit? Good job.

[Guest]

Processor Graph

[Guest]

Added a graph for the Total CPU breakdown.

Requirements

http://www.snmp-informant.com/
(Work Standard Version - Ver 1.3 - problems with 1.2)

Notes on SNMP Informant

SNMP Informant will not install on Windows 95, 98, Me or Windows NT, or any derivative of Linux or Unix. It is designed for Windows 2000, XP and 2003.


Copy
Lit_Cacti_NFO_STD_Processor.xml TO ......\cacti\resource\snmp_queries

Copy Lit_Cacti_NFO_STD_Processor_Total.xml TO .......\cacti\resource\snmp_queries

Import
cacti_data_query_lit_nfo_std_processor_percents.xml
cacti_data_query_lit_nfo_std_processor_percents_total.xml

[Lit]

Total Cpu Graph

WMI Processor details : - WMI W32 CPU (any number of processors) Perl Script via WMI

[law]

I can't c any data in my graph. Any idea what is happening?? Attached a copy of my screen capture. It only shows a blank chart even though i followed the sample template here.

[ritter6281]

Lit_Cacti_NFO_STD_Processor.xml will not import into 0.8.6h. when I try to manually copy and past, I get an import error.

[padonker]

Hi, is it possible to use this to feed info to a linux cacti server? Mind you, I'm new to this and rather clueless
If there are resources on how to do this, please point me in the right direction.
This question goes for all windows based queries as my cacti box is linux based

Tnx
Patrick

[GMADSON]

Hi, my english is very poor, but i will try ... ,

I install:
* the standard SNMP Informant agent
* Lit_NFO_Std_Memory_Pages tamplate (works fine)
* Lit_NFO_Std_Processor_Percents (doesnt work )

But, the Lit_NFO_Std_Processor_Percents doesn´t works.

I import this tamplates:
cacti_data_query_lit_nfo_std_processor_percents.xml
cacti_data_query_lit_nfo_std_processor_percents_total.xml
cacti_data_template_lit_nfo_std_processor_percents.xml
cacti_graph_template_lit_nfo_std_processor.xml
cacti_graph_template_lit_nfo_std_processor_percents.xml

and I copy to /srv/www/cacti/resource/snmp_queries:
Lit_Cacti_NFO_STD_Processor.xml
Lit_Cacti_NFO_STD_Processor_Total.xml

more information: the memory template works with SNMPv1 or SNMPv2, SNMP UDP port 161m and SNMP Timeout 500

When i import cacti_graph_template_lit_nfo_std_processor_percents.xml, i get one error:

Graph Template

[success] Lit_NFO_Std_Processor_Percents [update]
...
+ Found Dependency: (Data Template Item) cpuPrivileged
+ Found Dependency: (Data Template Item) cpuUser
+ Unmet Dependency: (Data Template Item)

DEBUB:

RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="TESTE - XXX_XXX_XXX_XXX - CPU Utilization" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="percent" \
--slope-mode \
DEF:a="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd":cpuProcessor:AVERAGE \
DEF:b="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd":cpuInterrupt:AVERAGE \
DEF:c="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd":cpuDPC:AVERAGE \
DEF:d="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd":cpuPrivileged:AVERAGE \
DEF:e="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd":cpuUser:AVERAGE \
AREA:a#CDCFC4:"Processor" \
GPRINTLAST:" Current\:%8.0lf" \
GPRINTAVERAGE:"Average\:%8.0lf" \
GPRINTMAX:"Max\:%8.0lf\n" \
LINE1:b#dd0000:"Interrupt" \
GPRINTLAST:" Current\:%8.0lf" \
GPRINTAVERAGE:"Average\:%8.0lf" \
GPRINTMAX:"Max\:%8.0lf\n" \
LINE1:c#862F2F:"DPC" \
GPRINT:c:LAST:" Current\:%8.0lf" \
GPRINT:c:AVERAGE:"Average\:%8.0lf" \
GPRINT:c:MAX:"Max\:%8.0lf\n" \
LINE1:d#4444FF:"Privileged" \
GPRINT:d:LAST:"Current\:%8.0lf" \
GPRINT:d:AVERAGE:"Average\:%8.0lf" \
GPRINT:d:MAX:"Max\:%8.0lf\n" \
LINE2:e#FFF200:"User" \
GPRINT:e:LAST:" Current\:%8.0lf" \
GPRINT:e:AVERAGE:"Average\:%8.0lf" \
GPRINT:e:MAX:"Max\:%8.0lf\n" \
COMMENT:"\n" \
COMMENT:"COMMENT\: Last Updated\: Tue 08 Sep 14\:20\:07 BRT 2009\n"


RRDTool Says:
ERROR: opening '/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_cpuuser_713.rrd': No such file or direc

----------------------------------------------------------------------


RRDTool Command:
/usr/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="TESTE - XXX_XXX_XXX_XXX - Memory Pages Per Sec" \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="Pages Sec" \
--slope-mode \
DEF:a="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_mempagespersec_712.rrd":memPagesPerSec:AVERAGE \
DEF:b="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_mempagefaultspersec_709.rrd":memPageFaultsPerSec:AVERAGE \
DEF:c="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_mempagesinputpersec_710.rrd":memPagesInputPerSec:AVERAGE \
DEF:d="/srv/www/cacti/rra/teste_XXX_XXX_XXX_XXX_mempagesoutputperse_711.rrd":memPagesOutputPerSe:AVERAGE \
LINE2:a#005199:"PagesPerSec" \
GPRINTLAST:" Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n" \
LINE2:b#35962B:"PagesFaultsPerSec" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINTMAX:"Maximum\:%8.2lf %s\n" \
LINE2:c#8F005C:"PagesInputPerSec" \
GPRINT:c:LAST:" Current\:%8.2lf %s" \
GPRINT:c:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:c:MAX:"Maximum\:%8.2lf %s\n" \
LINE2:d#FFF200:"PagesOutputPerSec" \
GPRINT:d:LAST:"Current\:%8.2lf %s" \
GPRINT:d:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:d:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"\n" \
COMMENT:"Last Updated\: Tue 08 Sep 14\:30\:15 BRT 2009"

RRDTool Says:
OK

---------

Whats is wrong ?

Thanks for help!

[cskp12]

becase standard SNMP Informant agent is not to support win2k8 sp2
,how do you fix this issue for template
thx for post