F5 LTM Pool Stats

chercen · Post by **chercen** » Wed Apr 29, 2009 4:57 pm

Hi,

Do the zip files contain the xml files to be placed in cacti/resources/snmp_queries? The f5_ltm_pool.xml file is the one to be imported into cacti to get the data query, but the xml file to be pushed into the directory is missing.

Anyone got it?

Regards,

scruboy01 · Post by **scruboy01** » Thu Apr 30, 2009 6:18 am

It is the other way around. f5_ltm_pool.xml and f5_ltm_pool_mem.xml are the files that get put in the resource directory. The other files are the ones that get imported.

chercen · Post by **chercen** » Thu Apr 30, 2009 8:52 am

scruboy01 wrote:It is the other way around. f5_ltm_pool.xml and f5_ltm_pool_mem.xml are the files that get put in the resource directory. The other files are the ones that get imported.

If you edit the f5_ltm_pool.xml from the zip file you will find that there is not any single OID definition, OID index etc and a XML file that is to get put in the "snmp_queries" directory must have all those things somewhere.

If you dont import the "f5_ltm_pool.xml" you will not get the Data Query template added to cacti. If you import the file you will get that data query, and if you click on it it will say that it needs an XML file named "f5_ltm_pool.xml". I think that giving the same name to the "Data Query" template and to the XML file to be put in the directory has led to this error.

I hope you will find the error..

Regards,

scruboy01 · Post by **scruboy01** » Thu Apr 30, 2009 10:16 am

You are correct. Some file names got mixed up and the two resource files got accidently left out. I added the correct files.

chercen · Post by **chercen** » Thu Apr 30, 2009 10:35 am

scruboy01 wrote:You are correct. Some file names got mixed up and the two resource files got accidently left out. I added the correct files.

Great, it works

Thank you for these templates

Regards,

scruboy01 · Post by **scruboy01** » Mon May 04, 2009 10:19 am

Chercen - Are you able to get Pool Member template to work correctly?

jhorstman · Post by **jhorstman** » Mon May 18, 2009 4:46 pm

I've attempted unsuccessfully at this point. Got everything imported, but have not gotten the graphs to create rrds

justbald · Post by **justbald** » Thu May 28, 2009 7:15 pm

This graph is very important to us. As stated above, we have been able to import the everything correctly, but for some reason............no graphs or rra files????

scruboy01 · Post by **scruboy01** » Fri May 29, 2009 6:28 am

I can't explain it either. I have been unable to get rra files also. I was hoping someone here might be able to help with that

mvil · Post by **mvil** » Wed Jun 17, 2009 7:52 am

scruboy01 wrote:I can't explain it either. I have been unable to get rra files also. I was hoping someone here might be able to help with that

Hi,

I am also looking for pool member stats and i have the same problem -> no rrd files created for the pool member graphs.

So i looked at the "f5_ltm_pool_mem.xml" file and i found that at line 5, it was "PoolIndex" (like on the file for pool stats) and not "PoolMemIndex".

After replacing this, the graphs are OK.

Thank you for the templates and i hope this will help you.

fxns · Post by **fxns** » Fri Jun 26, 2009 9:32 am

mvil wrote:
scruboy01 wrote:I can't explain it either. I have been unable to get rra files also. I was hoping someone here might be able to help with that
Hi,

I am also looking for pool member stats and i have the same problem -> no rrd files created for the pool member graphs.

So i looked at the "f5_ltm_pool_mem.xml" file and i found that at line 5, it was "PoolIndex" (like on the file for pool stats) and not "PoolMemIndex".

After replacing this, the graphs are OK.

Thank you for the templates and i hope this will help you.

I did what you suggested above and I am still not having any luck. After you modified the f5_ltm_pool_mem.xml file, did you remove the graphs and re-create them?

If editing that file is the solution, shouldn't the down-loadable files be updated as well?

scruboy01 · Post by **scruboy01** » Fri Jun 26, 2009 9:34 am

Thank you mvil! That did end up fixing the problem. I knew it was something stupid like that.

I will be updating the files shortly.

fxns · Post by **fxns** » Fri Jun 26, 2009 9:44 am

I did notice that when I create the graphs for my LTM it shows a "create from data query" that doesn't have values for the index values etc.

Is this normal?

scruboy01 · Post by **scruboy01** » Fri Jun 26, 2009 9:47 am

Did you copy the f5_ltm_pool_mem.xml file in to your SNMP resource directory (usually <cacti_path>/resource/snmp_queries/)?

fxns · Post by **fxns** » Fri Jun 26, 2009 9:52 am

scruboy01 wrote:Did you copy the f5_ltm_pool_mem.xml file in to your SNMP resource directory (usually <cacti_path>/resource/snmp_queries/)?

Yes, I did. That is the file that I modified as per the directions a few posts up. It still does not create the RRD files for any of the member related items.

EDIT
Perhaps I should just remove them all and wait for your updated files?

Cacti

F5 LTM Pool Stats

PLEASE HELP.........

Who is online