[ ERROR ] -- RRDTool Command:

[Nikolas]

Hello.

I have just installed CACTI using the complete pack, the ones which installs everything you need, i got it on this forum.

Well, after i configure everything and debug, this error shows up :

RRDTool Command:

C:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Servidor Firewall - Traffic - 10.1.1.3 (49:6E:74:65:6C:)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Apache2/htdocs/cacti/rra/servidor_firewall_traffic_in_18.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Apache2/htdocs/cacti/rra/servidor_firewall_traffic_in_18.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s\n"
RRDTool Says:

ERROR: opening 'C:/Apache2/htdocs/cacti/rra/servidor_firewall_traffic_in_18.rrd': No such file or directory

-- Help ? --

Thanks !!

[BSOD2600]

Follow the guides in http://forums.cacti.net/viewtopic.php?t=11747 then repost once complete.

[Nikolas]

I belive this files will be all it is asking on that post.

Files are atached.

Thanks

[BSOD2600]

Did you follow the troubleshooting steps from the link I posted?

It doesn't appear the cacti poller has ever ran. Did you follow the post installation steps from the cacti installer?

[Nikolas]

Did you follow the troubleshooting steps from the link I posted?

It doesn't appear the cacti poller has ever ran. Did you follow the post installation steps from the cacti installer?

Hello.
I re-installed.
I did step by step, 100% sure it is all corret.

But now i am getting a different error, it is this one:

RRDTool Command:

c:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Servidor Proxy - Traffic - 192.168.0.11 (Broadcom NetXtr)" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Inetpub/wwwroot/cacti/rra/servidor_proxy_traffic_in_10.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Inetpub/wwwroot/cacti/rra/servidor_proxy_traffic_in_10.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s\n"

RRDTool Says:

Acesso negado ( Denyed access )

_____________________________________________

I went back and i gave permission to " ALL " user , in every folder i know it is listed above, still dont work.

I gota be missing something.

If you wish to acces my cacti server, i can arrange that.

Thanks !

[Nikolas]

Well, here i am again.

I gave permissions to all folders and subfolders, and now, a very different kind of error.

The server that i am trying to make the graphs has 2 interfaces.
One inside and one outside.

For the outside one now i am getting this error :

ERROR: No DS called 'traffic_in' in 'C:/Inetpub/wwwroot/cacti/rra/servidor_proxy_traffic_in_9.rrd'

Even thou the file is there ( i created it ).

For the inside NIC, this error shows up:

ERROR: opening 'C:/Inetpub/wwwroot/cacti/rra/servidor_proxy_traffic_in_10.rrd': No such file or directory

I did not creat the file yet, and i dont think i should, i guess creating this file should be automatic.

If anyone would like to see the server, i can arrange an external access.

THANKS !

[Nikolas]

I guess i found what the problem is.

On this server where i want to install CACTI also have a KERIO installed.
I remember once, when i was looking for what KERIO install ... i saw that he alterates a lot of stuff in the network adaptors.

Well, i assume that because the graphs for memory, disk usage and process are running just NICE !

Well, guess i will have to install it on another server.

Thanks for the help !