Host template for Compaq (HP) Insight Manager.

Templates, scripts for templates, scripts and requests for templates.

Moderators: Developers, Moderators

jnojr
Cacti User
Posts: 65
Joined: Tue Jul 15, 2008 11:16 am
Location: San Diego, CA
Contact:

Post by jnojr »

rayvd wrote:
Actually, removing the leading 0's doesn't quite do the trick. That last leading zero refers to the 'chassis' we are dealing with. 0 is invalid, but we do need some value there. I'm not sure which scenario would exist where you'd have multiple chassis, but setting this to 1 chooses the "first one" (only one?).

Seems to make the temp graphs work for me.
Changing them all to .1 did not work.

After getting the MIB installed, I can see what these OIDs are for:

CPQHLTH-MIB::cpqHeTemperatureChassis.1.1 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureChassis.1.2 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureChassis.1.3 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureChassis.1.4 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureChassis.1.5 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureIndex.1.1 = INTEGER: 1
CPQHLTH-MIB::cpqHeTemperatureIndex.1.2 = INTEGER: 2
CPQHLTH-MIB::cpqHeTemperatureIndex.1.3 = INTEGER: 3
CPQHLTH-MIB::cpqHeTemperatureIndex.1.4 = INTEGER: 4
CPQHLTH-MIB::cpqHeTemperatureIndex.1.5 = INTEGER: 5
CPQHLTH-MIB::cpqHeTemperatureLocale.1.1 = INTEGER: cpu(6)
CPQHLTH-MIB::cpqHeTemperatureLocale.1.2 = INTEGER: cpu(6)
CPQHLTH-MIB::cpqHeTemperatureLocale.1.3 = INTEGER: ioBoard(5)
CPQHLTH-MIB::cpqHeTemperatureLocale.1.4 = INTEGER: cpu(6)
CPQHLTH-MIB::cpqHeTemperatureLocale.1.5 = INTEGER: powerSupply(10)
CPQHLTH-MIB::cpqHeTemperatureCelsius.1.1 = INTEGER: 43
CPQHLTH-MIB::cpqHeTemperatureCelsius.1.2 = INTEGER: 47
CPQHLTH-MIB::cpqHeTemperatureCelsius.1.3 = INTEGER: 52
CPQHLTH-MIB::cpqHeTemperatureCelsius.1.4 = INTEGER: 43
CPQHLTH-MIB::cpqHeTemperatureCelsius.1.5 = INTEGER: 34
CPQHLTH-MIB::cpqHeTemperatureThreshold.1.1 = INTEGER: 62
CPQHLTH-MIB::cpqHeTemperatureThreshold.1.2 = INTEGER: 73
CPQHLTH-MIB::cpqHeTemperatureThreshold.1.3 = INTEGER: 68
CPQHLTH-MIB::cpqHeTemperatureThreshold.1.4 = INTEGER: 73
CPQHLTH-MIB::cpqHeTemperatureThreshold.1.5 = INTEGER: 55
CPQHLTH-MIB::cpqHeTemperatureCondition.1.1 = INTEGER: ok(2)
CPQHLTH-MIB::cpqHeTemperatureCondition.1.2 = INTEGER: ok(2)
CPQHLTH-MIB::cpqHeTemperatureCondition.1.3 = INTEGER: ok(2)
CPQHLTH-MIB::cpqHeTemperatureCondition.1.4 = INTEGER: ok(2)
CPQHLTH-MIB::cpqHeTemperatureCondition.1.5 = INTEGER: ok(2)
CPQHLTH-MIB::cpqHeTemperatureThresholdType.1.1 = INTEGER: caution(9)
CPQHLTH-MIB::cpqHeTemperatureThresholdType.1.2 = INTEGER: caution(9)
CPQHLTH-MIB::cpqHeTemperatureThresholdType.1.3 = INTEGER: caution(9)
CPQHLTH-MIB::cpqHeTemperatureThresholdType.1.4 = INTEGER: caution(9)
CPQHLTH-MIB::cpqHeTemperatureThresholdType.1.5 = INTEGER: caution(9)

So, .1, .2, and .4 are for CPUs (stringe, system has two CPUS...), .3 is IO Board, and .5 is Power Supply.

Can anyone use that info to fix that XML file?
jnojr
Cacti User
Posts: 65
Joined: Tue Jul 15, 2008 11:16 am
Location: San Diego, CA
Contact:

Post by jnojr »

Any more insight into how to make this work?
fogster
Posts: 5
Joined: Thu Jan 31, 2008 8:38 pm

Post by fogster »

I'm feeling kind of foolish for not being able to make this work. I don't understand what the XML file is doing so I haven't had any luck changing it.

.1.3.6.1.4.1.232.6.2.6.8.1.4.1 is the OID you want for temperatures, at least on my DL380 G3.

It maps up nicely:
SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.1.1 = INTEGER: 35
SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.1.2 = INTEGER: 34
SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.1.3 = INTEGER: 47
SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.1.4 = INTEGER: 35
SNMPv2-SMI::enterprises.232.6.2.6.8.1.4.1.5 = INTEGER: 28
With:
hpasmcli> show temp
Sensor Location Temp Threshold
------ -------- ---- ---------
#1 PROCESSOR_ZONE 35C/95F 62C/143F
#2 CPU#1 34C/93F 73C/163F
#3 I/O_ZONE 47C/116F 68C/154F
#4 CPU#2 36C/96F 73C/163F
#5 POWER_SUPPLY_BAY 28C/82F 53C/127F
(CPU #2 has apparently gone up a degree in hpasm from when I ran the SNMP query.)

.1.3.6.1.4.1.232.6.2.6.8.1.5.1 has the "threshold" values if someone feels they're necessary:
SNMPv2-SMI::enterprises.232.6.2.6.8.1.5.1.1 = INTEGER: 62
SNMPv2-SMI::enterprises.232.6.2.6.8.1.5.1.2 = INTEGER: 73
SNMPv2-SMI::enterprises.232.6.2.6.8.1.5.1.3 = INTEGER: 68
SNMPv2-SMI::enterprises.232.6.2.6.8.1.5.1.4 = INTEGER: 73
SNMPv2-SMI::enterprises.232.6.2.6.8.1.5.1.5 = INTEGER: 53
The data is in Celsius. I'm not sure SNMP exports the data in Fahrenheit, but it's easy enough to change, if only I could get the query to work.
eschoeller
Cacti User
Posts: 234
Joined: Mon Dec 13, 2004 3:03 pm

Post by eschoeller »

This may be hardware specific, but to summarize, the changes I made to get my DL320s working ...

Code: Select all

<oid_index>.1.3.6.1.4.1.232.6.2.6.8.1.2</oid_index>
....
<cpqHeTemperatureIndex>
    <name>Index</name>
    <method>walk</method>
    <source>value</source>
    <direction>input</direction>
    <oid>.1.3.6.1.4.1.232.6.2.6.8.1.2</oid>
</cpqHeTemperatureIndex>
...
<cpqHeTemperatureCelsius>
    <name>Temperature</name>
    <method>walk</method>
    <source>value</source>
    <direction>output</direction>
    <oid>.1.3.6.1.4.1.232.6.2.6.8.1.4.1</oid>
</cpqHeTemperatureCelsius>
I am also trying to figure out if I can use a VALUE/REGEX to change the TemperatureLocale type from an integer to an actual value (ie. 6 = CPU) but it's a bit over my head.

I've made a lot of other minor changes to this template and I'll post the whole set when I'm done.
mgb
Cacti User
Posts: 124
Joined: Mon Jun 21, 2004 4:06 am
Location: North of the Netherlands

Post by mgb »

Glad that someone improves on my template. I don't have use for it anymore but it's nice to see it evolving so it might span the future.

Michael :D
9Nails
Posts: 42
Joined: Thu Nov 20, 2008 4:32 pm

Post by 9Nails »

eschoeller wrote:This may be hardware specific, but to summarize, the changes I made to get my DL320s working ...

I am also trying to figure out if I can use a VALUE/REGEX to change the TemperatureLocale type from an integer to an actual value (ie. 6 = CPU) but it's a bit over my head.

I've made a lot of other minor changes to this template and I'll post the whole set when I'm done.
Have you had any time to get the sensor locations to use a real name instead of the number?
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest