isdn oid

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
Neilbo
Posts: 36
Joined: Fri Mar 23, 2007 3:31 pm

isdn oid

Post by Neilbo »

Looking for an oid that will give me current calls on a PRI. Anyone find this yet?

It would be for a Cisco 3845.

I can only find the counter oids(isdnSigStatsOutConnected,1.3.6.1.2.1.10.20.1.3.3.1.4)

Thanks
begemoti
Posts: 15
Joined: Tue Apr 03, 2007 6:05 am
Location: Gudauri, Georgia

Post by begemoti »

I have AS5350 with 8 PRI. I found OID for Active Calls which are:
1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.0 for Serial 3/0:15
1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.1 Serial 3/1:15
...
1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.7 Se3/7:15

I couldn't index them yet.
mondo
Posts: 1
Joined: Wed May 14, 2008 10:26 am

Post by mondo »

I have Cisco 3845 with 10 E1 PRI. When I try to browse 1.3.6.1.4.1.9.10.19.1.1.9.1.3.3.X i see only 0.0, 0.1, 1.0 and 1.0 values.
Meanwhile a have se 0/0/0, 0/0/1 etc interfaces. How can I monitor this one?
And the cpmActiveDS0s value is less than I see in "sh voice call status" or sh isdn call active. For example, cpmActiveDS0s is 18 while "sh voice call status" show 30 active calls. Why so?
acornu
Posts: 16
Joined: Sat Mar 18, 2006 6:52 pm

Post by acornu »

Hi,

I've been using the OID bellow on 3800, 7204 routers. It pools the amount of calls per polling interval (5min in our case).

Data template created using these OIDs:
inbound calls:
1.3.6.1.2.1.10.20.1.3.3.1.1.1 <-- first PRI
1.3.6.1.2.1.10.20.1.3.3.1.1.2 <-- second PRI
...

outbound calls:
.1.3.6.1.2.1.10.20.1.3.3.1.3.1 <-- first PRI
.1.3.6.1.2.1.10.20.1.3.3.1.3.2 <-- second PRI
...

Then I created a graph template for each PRI numbers, e.g. graph template for PRI#1, then another for PRI#2, etc.



Hope this helps.
evilzardoz
Cacti User
Posts: 55
Joined: Sun Dec 04, 2005 10:59 pm

Post by evilzardoz »

Hi,

Has anybody else here had any success with this? I'm trying to find out how many active calls we have on an E1 link i.e. we'd like to query via SNMP, the utilisation of each E1 port.

thanks!
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests