[TODO] Error: OID not increasing

[hchao]

Huawei S2403H Switch
run mactrack_scanner.php
Error: OID not increasing
any idea?
thx

Code: Select all

php mactrack_scanner.php -id=1 -d

...
INFO: HOST: 192.168.219.253, TYPE: Huawei Versatile Routing Platform Softwa, TOTAL PORTS: 26, OPER PORTS: 17
Error: OID not increasing: .1.3.6.1.2.1.17.4.3.1.3.0.224.252.45.93.133
 >= .1.3.6.1.2.1.17.4.3.1.3.0.0.180.32.97.34

Error: OID not increasing: .1.3.6.1.2.1.17.4.3.1.2.0.224.252.45.93.133
 >= .1.3.6.1.2.1.17.4.3.1.2.0.0.180.32.97.34

DEBUG: Port number information collected.
Error: OID not increasing: .1.3.6.1.2.1.17.4.3.1.1.0.224.252.45.93.133
 >= .1.3.6.1.2.1.17.4.3.1.1.0.0.180.32.97.34

DEBUG: INDEX: '0' MAC ADDRESS: 00:E0:FC:2D:5D:85
DEBUG: INDEX: '1' MAC ADDRESS: 00:00:B4:20:61:22
...

Cacti Version 0.8.6j
Device Tracking (mactrack - v1.0)

[alteleid]

the same for Fortigate 1000A ...

Error: OID not increasing: .1.3.6.1.2.1.4.22.1.2.14.0.0.0.0
>= .1.3.6.1.2.1.4.22.1.2.14.0.0.0.0

[TheWitness]

It means that with SNMP walk is not operating properly. What version of SNMP are you using to access the device? What version of PHP are you using and what modules?

TheWitness

p.s. This is a device support issue, not a mactrack issue.

[alteleid]

Yep, it's the problem of the device, i'm using the net-snmp 5.4 and if i set option "-Cc" it just loops infintely, otherwise gives the same message

[alteleid]

made a small hack:

in snmp.php:

1. disabled PHP function call
2. added a "-Cc" to the list of args to snmpbulkwalk, the device which looped infinetely dropped from the system till resolution by vendor.

works

[TheWitness]

Can you please open a Cacti Bug at http://bugs.cacti.net

Thanks,

TheWitness