Few Templates (NetScreen,Nokia,Cisco,Fortigate)

[lostpckt]

Need a little bit of help here. Got everything installed and seems to be running, except (like everyone else) the stats.

I see the following in my cacti log

Code: Select all

03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] DS[27453] WARNING: Result from SNMP not valid. Partial Result: ...
03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] DS[27452] WARNING: Result from SNMP not valid. Partial Result: ...
03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] DS[27451] WARNING: Result from SNMP not valid. Partial Result: ...
03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] ERROR: Problems parsing Multi SNMP OID! (oid: SNMPv2-SMI::enterprises.3224.16.2.2.0 )
03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] ERROR: Problems parsing Multi SNMP OID! (oid: SNMPv2-SMI::enterprises.3224.16.2.3.0 )
03/17/2009 10:30:33 AM - SPINE: Poller[0] Host[378] ERROR: Problems parsing Multi SNMP OID! (oid: SNMPv2-SMI::enterprises.3224.16.2.1.0 ) 

but when I try to walk those mibs from the cli I get no errors

Code: Select all

[x@x ~]$ snmpwalk -v 2c -c xxxx x.x.x.x SNMPv2-SMI::enterprises.3224.16.3.2.0
SNMPv2-SMI::enterprises.3224.16.3.2.0 = INTEGER: 202461
[x@x ~]$ snmpwalk -v 2c -c xxxx x.x.x.x SNMPv2-SMI::enterprises.3224.16.2.1.0
SNMPv2-SMI::enterprises.3224.16.2.1.0 = INTEGER: 565037664
[x@x ~]$ snmpwalk -v 2c -c xxxx x.x.x.x SNMPv2-SMI::enterprises.3224.16.2.2.0
SNMPv2-SMI::enterprises.3224.16.2.2.0 = INTEGER: 1202853184
[x@x ~]$ snmpwalk -v 2c -c xxxx x.x.x.x SNMPv2-SMI::enterprises.3224.16.2.3.0
SNMPv2-SMI::enterprises.3224.16.2.3.0 = INTEGER: 233

Any thoughts?

Cacti v0.8.7a running spine

[tibby]

Hello!

Anyone knows what's the problem with this?

In debug RRDTool Says: OK,
But the graph is not being generated.
In the log I am also getting errors, since the template been added.
Someone please help me!

Thanks,
Tibby

[tibby]

If I use

Code: Select all

php -q cmd.php 23 290

I get this:

Code: Select all

Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: .1.3.6.1.4.1.9.9.13.1.3.1.4.1

But with snmpget I get a different error:

Code: Select all

snmpget -c [COMUNNITY] -v 1 [IPADDRESS] .1.3.6.1.4.1.9.9.13.1.3.1.3.1
Error in packet
Reason: (noSuchName) There is no such variable name in this MIB.
Failed object: SNMPv2-SMI::enterprises.9.9.13.1.3.1.3.1

Is it possible, that cacti wants to refer to an object that does not exists?
How can I fix this?

[samir7399]

Installed the Fortigate template on my 0.8.8a (on windows) version and it is working properly.