[solved] Newbie : Graphs are not showing

[rajeshck]

Hi

I'm new to Cacti, today installed by using cacti-0.8.7d-1.91x86.exe.

Installation went perfect, i have given permissions to all required files too(cmd, rrdtool, and webroot/cacti folder) added one device, while trying to create an graph, always getting error (debug out put shown below)

RRDTool Command:

C:/rrdtool/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="DJA Distribution 1 - Traffic - Gi7/1" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="C\:/Inetpub/wwwroot/cacti/rra/dja_distribution_1_traffic_in_9.rrd":traffic_in:AVERAGE \
DEF:b="C\:/Inetpub/wwwroot/cacti/rra/dja_distribution_1_traffic_in_9.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdeff=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"Total In\: 0 bytes\n" \
LINE1:cdeff#002A97FF:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdeff:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdeff:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"Total Out\: 0 bytes\n"
RRDTool Says:

ERROR: opening 'C:/Inetpub/wwwroot/cacti/rra/dja_distribution_1_traffic_in_9.rrd': No such file or directory

i'm attching the log file and techsupport

Please help me

Thanks

[BSOD2600]

1) did you wait 10 minutes for the rrd to get created and populated with data?

2) Please change the logging level to debug. Let the poller run. Change the logging level back to low. Attach the log file.

[rajeshck]

Thank you verymuch BSOD2600

it was a permission problem for my scheduled task - i've changed the permissions, now its started showing graphs

Thank you for your efforts

Rajesh