Ad blocker detected: Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker on our website.
Heiko wrote:I would like to create a report for our HP ProCurve switches..
Problem seems to be that there are no seperate data templates,
I onlye the the "Interface - Traffic (bits/sc) " in the HostTemplate but not under "Data Templates".
Therefore I cant select the "Interface - Traffic (bits/sc)" when I create a new graph.
How can I get through this?
I attached a screenshot of the host template.
thx and greetings
Mhmm... I never tried this before. I'll have to test it first.
Thank's for this great plugin.
I use it for generating reports on traffic interfaces. I've only a question. I need to generate this kind of report on aggregate traffic.
In example, I have a lot of traffic interfaces of my coustomers. I need to generate some reports on the sum of all traffic interfaces. Is it possible or planned to implement this feature? Of course the traffic interfaces have the same name for datasources and are using the same template (if that could help).
This to implement a type of report referring to all traffic of coustomers or wathever I want to consider aggregate.
Heiko wrote:I would like to create a report for our HP ProCurve switches..
Problem seems to be that there are no seperate data templates,
I onlye the the "Interface - Traffic (bits/sc) " in the HostTemplate but not under "Data Templates".
Therefore I cant select the "Interface - Traffic (bits/sc)" when I create a new graph.
How can I get through this?
I attached a screenshot of the host template.
thx and greetings
Mhmm... I never tried this before. I'll have to test it first.
Thank's for this great plugin.
I use it for generating reports on traffic interfaces. I've only a question. I need to generate this kind of report on aggregate traffic.
In example, I have a lot of traffic interfaces of my coustomers. I need to generate some reports on the sum of all traffic interfaces. Is it possible or planned to implement this feature? Of course the traffic interfaces have the same name for datasources and are using the same template (if that could help).
This to implement a type of report referring to all traffic of coustomers or wathever I want to consider aggregate.
Thank's a lot!
Simon
Mmmh....
Simon I think you should give me some time to answer to your private message before starting with cross-postings.
ReportIt does not support the features of Aggregate. Till now every data item will be handled separately and ReportIt only offers the possibility to show the sum per column within the report view.
browniebraun wrote:
Mmmh....
Simon I think you should give me some time to answer to your private message before starting with cross-postings.
You're right, btw after writing you a PM I've thought maybe my question _could_ be interested for everyone
browniebraun wrote:
ReportIt does not support the features of Aggregate. Till now every data item will be handled separately and ReportIt only offers the possibility to show the sum per column within the report view.
That's ok! I'll look forward if something like this could be implemented.
Meanwhile thank's for the answer and for this plugin!
I am having some issues after installing this plugin. the install worked great, but when I go to create a report template, I have a very select few of data templates to choose from. I was wondering why all of my data templates wouldn't be showing up from the pulldown menu when creating a report template. Thanks for the help
Jacob Bergman
Pullman School District
jbergman@psd267.wednet.edu
Are you missing data templates which are still in use? ReportIt recudes the lists automatically to that ones which are in use. (This didn't change since v0.1)
I use cacti since two years and I really want (need) to implement your great plugin.
My problem is that I (like lot of user) can't find any doc about your plugin.
I've found some answers on the forum, but lot of people always refer to your powerpoint that is unfortunately no more available.
My questions are the following :
- Is there a tutorial or doc for this plugin
- Where can I find the original powerpoint? In fact it may be outdated, but for always really good for newbie like me.
- Any release date for v0.7.0
I use cacti since two years and I really want (need) to implement your great plugin.
My problem is that I (like lot of user) can't find any doc about your plugin.
I've found some answers on the forum, but lot of people always refer to your powerpoint that is unfortunately no more available.
My questions are the following :
- Is there a tutorial or doc for this plugin
- Where can I find the original powerpoint? In fact it may be outdated, but for always really good for newbie like me.
- Any release date for v0.7.0
Best regards,
Vince
Hi browniebraun,
I'am exactly in the same way
I've installed your plugin in my Cacti server (upgraded into the 0.8.7c version) and I can't find any doc to guide me.
Thanks for your great job, I hope you could help us
The only data templates I am able to select are a few cisco ones, some are and aren't in use, and some APC UPS templates I imported a long time ago and most of them are in use for graphs.
I hope this answered your question. Thanks!
Jacob Bergman
Pullman School District
jbergman@psd267.wednet.edu
Hello,
i installed for a few days the new cacti plugin reportit (a very nice and usefull tool). I also updated by php installation to support the gd library. But unfortunately i get no chart pictures after i select the smal graph icon (only a red cross). Then i select "view image" it returns a error:
"Fatal error: Non-static method Color::Color() cannot be called statically, assuming $this from incompatible context in /usr/share/cacti/plugins/reportit/lib_ext/graidle/graidle.php on line 75"
Anybody an idea?
My Environment:
Cacti Version 0.8.7c
Plugin Architecture 2.2
Poller Type Cactid v
Server Info Linux 2.6.9-67.0.7.ELsmp
Web Server Apache/2.0.63 (Unix) mod_ssl/2.0.63 OpenSSL/0.9.7a PHP/5.2.8
PHP Version 5.2.8
PHP Extensions xmlwriter, libxml, dom, xmlreader, xml, tokenizer, session, pcre, SimpleXML, SPL, PDO, sockets, snmp, SQLite, standard, Reflection, posix, pdo_sqlite, mysqli, mysql, mbstring, json, iconv, hash, gettext, gd, filter, dba, date, ctype, zlib, openssl, apache2handler
MySQL Version 5.0.51a-community-log
RRDTool Version 1.2.27
I use cacti since two years and I really want (need) to implement your great plugin.
My problem is that I (like lot of user) can't find any doc about your plugin.
I've found some answers on the forum, but lot of people always refer to your powerpoint that is unfortunately no more available.
My questions are the following :
- Is there a tutorial or doc for this plugin
- Where can I find the original powerpoint? In fact it may be outdated, but for always really good for newbie like me.
- Any release date for v0.7.0
Best regards,
Vince
seerow wrote:Hello,
i installed for a few days the new cacti plugin reportit (a very nice and usefull tool). I also updated by php installation to support the gd library. But unfortunately i get no chart pictures after i select the smal graph icon (only a red cross). Then i select "view image" it returns a error:
"Fatal error: Non-static method Color::Color() cannot be called statically, assuming $this from incompatible context in /usr/share/cacti/plugins/reportit/lib_ext/graidle/graidle.php on line 75"
Anybody an idea?
Hi Cacti Community!
Sorry for my late response, but I'm busy again .
A documentation will be published next weekend!
The original powerpoint bases on ReportIt 0.2 which is too old and I don't have a copy of it.
Till now I don't have a release date for 0.7.0. After some unsuccessful and frustrating tests with pChart I have to program Graidle's successor completely on my own.
With regard to Seerow's error message:
I've the same issue on one of my dev boxes running PHP 5.2.8 too, but I didn't have the time to analyse what is going wrong within Graidle.
