AscenLink 800 Templates

[cspenpen]

This template tests on linux. I modify interface.xml's OID value. It can be used in ascenlink 800. Maybe ohter ascenlink series work too..

installation
1.import all data_query,data_template,graph_template
2.copy ascenlink.xml to <yourcactidir>/resource/snmp_queries

How it works
1.If you choice snmp method in "Downed Device Detection", and you will get error message, but it's ok. Because ascenlink use different oid value. You can use snmpwalk to check your ascenlink snmp is working.

snmpwalk -v 1 -c public <ascenlink ip> 1.3.6.1.4.1.8837

2.At graph_templates and data_queries add ascenlink templates and queries, and create graph.

[wo2]

Hi, I have problem with ascenlink, either create a new data source by using generic oid template, or use your templates, the outbound cannot capture any data. Do you know why?

[cspenpen]

Hi, I have problem with ascenlink, either create a new data source by using generic oid template, or use your templates, the outbound cannot capture any data. Do you know why?

even use snmpwalk?

[wo2]

thanks for your reply, snmpwalk is fine, but just cannot display the outbound, this is how it looks like, I thought it's the cacti problem, but I configure a second cacti in another server, the result is the same.

[cspenpen]

go "console -> system utilities -> View Poller Cache" check ascenlink's oid..


and go to "console -> Graph Management" check inbound or outbound is selected ..

[wo2]

hi, I have checked both and is all correct as you mentioned, but no inbound graph plotted.

[cspenpen]

o..is there any ascenlink error log in cacti log?

[wo2]

hi, I am so sorry for late reply, I didn't notice you have reply to my last post. I checked the cacti log but there is no error. Can you try to poll my ascenlink and see if you have the same problem? it's 203.142.36.90, snmp v2 community name: yahoomsn. I suspect it's the ascenlink problem. It shouldn't be the ascenlink firewall right? as long as we can poll data from it, the firewall should be ok I supposed.

[iwasody]

Try This:

Device->SNMP Options->Maximum OID's Per Get Request

set "1" for this~

[sbhsu]

Hi All:

I've modify the "ascenlink.xml" to use on my fortiwan devices & cacti version 1.1.16.

Please see the attachment.

Thank you.

[darkhsu]

Hi All:

I've modify the "ascenlink.xml" to use on my fortiwan devices & cacti version 1.1.16.

Please see the attachment.

Thank you.

Hello,

Import on Cacti 1.1.36 error.
Error message [IMPORT parse_xml_hash ERROR wrong hash format for hash: name]
Any help?

Thanks.

[netniV]

Try updating to 1.1.38?

[darkhsu]

Try updating to 1.1.38?

It's done, but not working.
can't even use "Preview Import Only", no respond, only same error message.

[netniV]

That is because the attached file is purely the XML data for the data query/input. It's not a full template file that can be imported.