For some reason, all of the sudden, any new graphs I create using the same template I've been using for the last year or two, don't work, with rrdtool failing to be able to produce a graph. However, existing graphs that were created awhile ago using the same template still work just fine, and continue to be updated. The template is In/Out Bits 95th percentile with 64-bit counters.
I'm not very well versed in rrdtool (which is why I installed cacti in the first place
) Does anyone have any ideas on what I should check? Here's the debug output from one of the failing graphs:RRDTool Command:
/usr/local/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Orovitz 12k - Traffic" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_in:AVERAGE \
DEF:b="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_in:LAST \
DEF:c="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_in:MIN \
DEF:d="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_in:MAX \
DEF:e="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_out:AVERAGE \
DEF:f="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_out:LAST \
DEF:g="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_out:MIN \
DEF:h="/usr/local/share/cacti/rra/orovitz_12k_traffic_in_2121.rrd":traffic_out:MAX \
CDEF:cdefa=a,8,* \
CDEF:cdefb=b,8,* \
CDEF:cdefd=d,8,* \
CDEF:cdefh=e,8,* \
CDEF:cdefi=f,8,* \
CDEF:cdefba=h,8,* \
CDEF:cdefbb=a,UN,INF,UNKN,IF \
CDEF:cdefbg=TIME,1226519973,GT,a,a,UN,0,a,IF,IF,TIME,1226519973,GT,e,e,UN,0,e,IF,IF,+ \
AREA:cdefa#157419FF:"In" \
GPRINT:cdefb:LAST:" Cur\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Av\:%8.2lf %s" \
GPRINT:cdefd:MAX:"Max\:%8.2lf %s" \
COMMENT:"Transfer\: 2.71 MB" \
HRULE:|95\:bits\:0\:current|#00FF00FF:"95%\:" \
COMMENT:"|95\:bits\:6\:current| mbit\n" \
LINE1:cdefh#002A8FFF:"Out" \
GPRINT:cdefi:LAST:"Cur\:%8.2lf %s" \
GPRINT:cdefh:AVERAGE:"Av\:%8.2lf %s" \
GPRINT:cdefba:MAX:"Max\:%8.2lf %s" \
AREA:cdefbb#8F9286FF:"" \
COMMENT:"Transfer\: 2.69 MB" \
HRULE:|95\:bits\:0\:current|#0000FFFF:"95%\:" \
COMMENT:"|95\:bits\:6\:current| mbit\n" \
COMMENT:"\n" \
HRULE:143998.74#FF0000FF:"Total 95%\:" \
COMMENT:"0.14 mbit" \
COMMENT:"Total Transfer\: 5.4 MB\n"
RRDTool Says:
The part after "RRDTool Says" is completely blank, I didn't truncate the post. Again, other templates work, and even the same template works for graphs that were created awhile back.
Here's the output from a working graph of the same template. Towards the end of the rrd command, its quite different. Is my template somehow corrupt? If the template somehow changes, does it only affect new graphs and not old ones? Working graph of (supposedly) same template:
RRDTool Command:
/usr/local/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Pentland Core - Traffic - To-Pentland-10k - Te7/4" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_in:AVERAGE \
DEF:b="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_in:LAST \
DEF:c="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_in:MIN \
DEF:d="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_in:MAX \
DEF:e="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_out:AVERAGE \
DEF:f="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_out:LAST \
DEF:g="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_out:MIN \
DEF:h="/usr/local/share/cacti/rra/pentland_core_traffic_in_1339.rrd":traffic_out:MAX \
CDEF:cdefa=a,8,* \
CDEF:cdefb=b,8,* \
CDEF:cdefd=d,8,* \
CDEF:cdefe=e,8,* \
CDEF:cdeff=f,8,* \
CDEF:cdefh=h,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefb:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefd:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdeff:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefh:MAX:"Maximum\:%8.2lf %s\n" \
COMMENT:"\n" \
HRULE:2667.75#FF0000FF:"95th Percentile" \
COMMENT:"(0 mbit in+out)"
RRDTool Says:
OK
Any suggestions would be greatly appreciated.
My system:
Cacti Version - 0.8.7b
Plugin Architecture - 2.1
Poller Type - CMD.php
Server Info - FreeBSD 7.0-RELEASE
Web Server - Apache/2.2.8 (FreeBSD) mod_ssl/2.2.8 OpenSSL/0.9.8e DAV/2 PHP/5.2.6 with Suhosin-Patch mod_perl/2.0.3 Perl/v5.8.8
PHP - 5.2.6
PHP Extensions - session, Reflection, date, libxml, apache2handler, mysql, pcre, xml, gettext, gd, sockets, standard, snmp, zlib, ldap, posix, filter, SimpleXML, SPL, mysqli
MySQL - 5.1.28-rc
RRDTool - 1.2.26
SNMP - 5.4.1
Plugins
- Global Plugin Settings (settings - v0.4)
Thresholds (thold - v0.3.9)
PHP Network Weathermap (weathermap - v0.95b)
Network Tools (tools - v0.2)
Device Tracking (mactrack - v1.1)
Network Discovery (discovery - v0.8.3)
Host Info (hostinfo - v0.2)
SuperLinks (superlinks - v0.72)
Create Aggregate Graphs (aggregate - v0.65)
ReportIt (ReportIt - v0.5.1)
Update Checker (update - v0.4)
Syslog Monitoring (syslog - v0.5.2)
Configuration manager (configmanager - v0.76)
