emailing reports

Post general support questions here that do not specifically fall into the Linux or Windows categories.

Moderators: Developers, Moderators

Post Reply
jwdvd
Posts: 19
Joined: Thu Nov 13, 2008 7:50 am

Post by jwdvd »

oh...

i had /var/apache2/htdocs/cacti/

i take then i just need /cacti/

??

regards

EDIT

M8 - YOU ARE A FECKIN LEGEND, working now via the manual file copy :-D that guide reads wrong to me, looks like i needed the full path, thanks a million for all you help, now onto the next upgrade :-D

ANOTHER EDIT :-D

looking to install thold now, the install notes say i have to add the files to the plugins dir, i dont have one, can i just create one?

regards
Top
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:
Contact Howie

Post by Howie »

If you installed the plugins arch right, you should have one. You *can* create one, but it sounds like something might not be right there.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Top
jwdvd
Posts: 19
Joined: Thu Nov 13, 2008 7:50 am

Post by jwdvd »

nope, im talkin' crap, sorry, i didnt have one before and i do now, sorry about that
Top
jwdvd
Posts: 19
Joined: Thu Nov 13, 2008 7:50 am

Post by jwdvd »

Hi there,

Just wanted to say thx a million for all your help on this problem, i now 100% get it and its now 100% working,

I have a few other issues now, silly things really.... like check this out...

i have added a default "USED SPACE" template to all my servers, but it only seems to show graphing for drives c and d, but not other drives :-/ very weird.
Top
User avatar
Howie
Cacti Guru User
Posts: 5508
Joined: Thu Sep 16, 2004 5:53 am
Location: United Kingdom
Contact:
Contact Howie

Post by Howie »

jwdvd wrote:Hi there,

Just wanted to say thx a million for all your help on this problem, i now 100% get it and its now 100% working,

I have a few other issues now, silly things really.... like check this out...

i have added a default "USED SPACE" template to all my servers, but it only seems to show graphing for drives c and d, but not other drives :-/ very weird.
Then the template is working... that's probably down to the SNMP agent. There are a couple of different disk space MIBs, from memory - one of them shows all disks, and even shows swap and physical memory as a 'disk' too, which is quite handy. I think the one I use is "SNMP - Get Mounted Partitions".
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Top
jwdvd
Posts: 19
Joined: Thu Nov 13, 2008 7:50 am

Post by jwdvd »

EDIT - forget that, its working now, i can see all my drives, i have set up a threshold template to email out an alert. It works fine, i get the email but the threshold is all wrong. I thought if i entered 90 for the threshold that could be 90%, but its 90 bytes by the looks of things, is there any way i can do this on a percentage basis so i can apply the same template to many servers.
Top
jwdvd
Posts: 19
Joined: Thu Nov 13, 2008 7:50 am

Post by jwdvd »

just found a guide and script you posted for the same issue a while back...

http://forums.cacti.net/post-142299.html

will give it a go, this is awesome software but can be a nightmare to get to grips with at first.



EDIT - i found this - http://cactiusers.org/forums/topic1305.html

but it has the script in txt file for windows. Im running caction solaris 10, do i still need a patch, and if so do you have a solaris 10 version.

regards
Top
Post Reply

Return to “Help: General”

Who is online

Users browsing this forum: No registered users and 0 guests