equallogic san?

rootkit · Post by **rootkit** » Fri May 09, 2008 9:14 pm

Has any1 been able to pull data off a equallogic san?

Did some searching didnt find any1 doing it.

Anyone wish to lend a hand?

Lecorps4fun · Post by **Lecorps4fun** » Fri Jul 25, 2008 2:58 pm

Bump!

I'm looking for this script too. Any help would be appreciated.

kpeterson · Post by **kpeterson** » Thu Oct 16, 2008 1:52 pm

I am in the middle of making a template for a EqualLogic PS5000 SAN. Right now I just have 2 graphs, one with all the temps and one with the fan speeds. I will post it once I am done.

rootkit · Post by **rootkit** » Thu Oct 16, 2008 1:53 pm

o that would be awesome!

kpeterson · Post by **kpeterson** » Thu Oct 16, 2008 1:59 pm

This is also my first attempt at making any graph from scrath so don't be suprised if there are issues lol. Should be able to post it later today

rootkit · Post by **rootkit** » Thu Oct 16, 2008 2:03 pm

sounds good to me

kpeterson · Post by **kpeterson** » Thu Oct 16, 2008 2:11 pm

Here are the 2 templates, let me know how they work out for you

rootkit · Post by **rootkit** » Thu Oct 16, 2008 2:34 pm

imports fine.

just waiting now =)

rootkit · Post by **rootkit** » Thu Oct 16, 2008 2:40 pm

WARNING: Result from SNMP not valid. Partial Result: ...

=)

ill have to play with it i guess.

kpeterson · Post by **kpeterson** » Thu Oct 16, 2008 2:49 pm

You might need to check the OID's in the data templates to make sure they match your hardware.

spoonwzd · Post by **spoonwzd** » Fri Nov 14, 2008 9:42 am

Anyone get any further with this? I have blank/nan graphs from my PS5000XV's running O/S 4.0.2.

spoonwzd · Post by **spoonwzd** » Wed Nov 19, 2008 11:53 am

Well, I've made some headway with this and have updated all the DS with the new OIDs.

I am currently only able to successfully graph the first SAN in the group, but it's a start. Pointers welcome - this is all new to me.

red_hack · Post by **red_hack** » Tue Feb 03, 2009 2:38 pm

I just put in a group of 3 and found that each unit and storage processor has a unique OID for it. So I had to modify all the OID's in the templates to match my machines.

The second from last number in the OID is what must be changed.

What was in the template
.enterprises.12740.2.1.7.1.3.1.318890316.1

What I had to change.
.enterprises.12740.2.1.7.1.3.1.1172725158.1

This is for all OID's in the template. the number 1172725158 is for my EQ storage processor 1 only. I recommend using snmpget on OID .enterprises.12740.2.1.7.1.3.1. To find the OID that is unique to your EQ. Then use search and replace on the XML template before importing. Note that there is a unique value for EACH storage processor.

spoonwzd · Post by **spoonwzd** » Tue Feb 03, 2009 4:03 pm

Yep, those were exactly my findings. I had to create mutliple templates to account for each SAN as each OID query was unique to each SAN.

I foung the quickest way to get the correct OID off each SAN was to run the mrtg-cfg command from each CLI. This config contained the listed OID identifier.

So what I've done is create 3 templates - SAN1-3 - and all you need to do to make them work with your SAN(s) is to update the OID in the template after you've imported it.

A bit of a pain I know, but until someone here can write a script to automate this, it's as good as i can make it.

Oh, you can't just go and change the OID's in the XML as when you import it, it just overwrites the one you exported!

Anyway, here's my 3 final (for now) SAN templates. They will graph the following from 3 EqualLogic SANs;

- Fan speeds
- Temperatures (for both active and redundant controller modules)
- Total IOPS/sec
- Total bytes/sec
- Latency
- Network interfaces

I think that's about it. Let me know how you get on

theacolyte · Post by **theacolyte** » Wed Apr 15, 2009 1:17 am

I have to confess, I spent a good hour trying to figure out how to get this to work, and I can't.

From what I can tell from snmpwalk, my enterprise OID is 12.1.1.0

But that doesn't appear to work.

Can someone hold my hand a little with this? Something step by step?

Thanks in advance.

Cacti

equallogic san?

equallogic san?

Got them working

Who is online