CISCO SLB

[polak92]

Hi,

may i use this template with Cisco ACE module ?


Thanks

[pvarthur]

I am also interested if this will work with ACE.

[simona]

Hi,
I had installed all scripts, but I don't understand how I can use those to graph reals and vservers.
Where can I write real and vserver IP or name?
Is there someone that can help me?
Thanks

Simona

[Hewie]

Hi,

has anyone managed to get this working with an ACE module?

Hewie

[metal_icer]

Hi,

Does anyone have any progress with Cisco ACE modules?

[theroy]

Just a little hint for the cacti 0.8.7B + Plugin arch 2.1 users:

I've you are trying to use this temple there isn't any output, to repair the template change the following line in both ss_slb_vserver.php and ss_slb_rserver.php:

from:
include_once(dirname(__FILE__) . "/../include/config.php");

into:
include_once(dirname(__FILE__) . "/../include/global.php");

[tsy]

Hi,

Does anyone have any progress with Cisco ACE modules?

Yes, have a look here : http://forums.cacti.net/about29195.html

TsY

[tsy]

Hi,

may i use this template with Cisco ACE module ?


Thanks

Oid are not exactly the sames. VServer are not existing, only serverfarm and realserver.

Have a look here : http://forums.cacti.net/about29195.html

TsY

[jumafrhe]

I think I have imported fine DanielG templates for Catalyst CSM modules. However, all graphs I tried for Vsever and Rserver templates appears empty. I only obtain graphs for slb_stats template. Anybody can help me to troubleshoot what is happening with Vserver and Rserver graphs?

Thanks.

[jagudo]

I have the same problem. Seems that data source files are not created. Also the name of the graphs don't resolve: |query_VirtualServer|:|query_slbVirtualPort|.

[jmax]

I also have the same problem. The real server graphs are created fine, however the virtual server graph are not created (rrd not created either) and I get a |query_VirtualServer|:|query_slbVirtualPort| in the graph name.

Did anyone managed to fix it?

(I am running 0.8.7b and I think I think that I managed to get it working in the past but the server was on 0.8.6)

[allymar1959]

We have recently installed Cacti 0.8.7d on a Windows 2003 server.
I have imported the templates for Cisco SLB vserver and rserver and copied the xml and php files to the appropriate directory. However when I run the data query the status appears correct but returns 0 rows and columns.
The verbose output from this query is as below

+ Running data query [13].
+ Found type = '4 '[script query].
+ Found data query XML file at 'C:/Apache2/htdocs/cacti/resource/script_server/slb_rserver.xml'
+ XML file parsed ok.
+ Executing script for list of indexes 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] index'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query RServer'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query Module'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query RName'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query Port'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query Cata'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query IX'
+ Executing script query 'C:\php\php.exe -q C:\Apache2\htdocs\cacti\scripts\ss_slb_rserver.php x.x.x.x 3 2:161:500:*******:::MD5::[None] query ID'
+ Found data query XML file at 'C:/Apache2/htdocs/cacti/resource/script_server/slb_rserver.xml'
+ Found data query XML file at 'C:/Apache2/htdocs/cacti/resource/script_server/slb_rserver.xml'
+ Found data query XML file at 'C:/Apache2/htdocs/cacti/resource/script_server/slb_rserver.xml'

I am a complete novice with cacti and would appreciate any advice offerred

[jgerry2002]

Fixed the |query_VirtualServer|:|query_slbVirtualPort| in the graph name issue...

Basically cacti was flipping out at the fact that the snmp data coming back in the graphing section was not unique as I have a PAIR of SLBs, one active and one passive.

We hacked in the OID value php script and added the same value to the xml file, and now it creates graphs correctly.

I also changed the graph template to add a module number in the title..like this..|host_description| -V- |query_VirtualServer|:|query_Module|:|query_slbVirtualPort|

Not sure if I exported that correctly... If someone can let me know how to do that I can get that exported correctly.

-Justin

[bidzer]

I'm getting the following error when trying to import the template, probably what you were referring to in your last comment??

Error: XML: Hash version does not exist.

Fixed the |query_VirtualServer|:|query_slbVirtualPort| in the graph name issue...

Basically cacti was flipping out at the fact that the snmp data coming back in the graphing section was not unique as I have a PAIR of SLBs, one active and one passive.

We hacked in the OID value php script and added the same value to the xml file, and now it creates graphs correctly.

I also changed the graph template to add a module number in the title..like this..|host_description| -V- |query_VirtualServer|:|query_Module|:|query_slbVirtualPort|

Not sure if I exported that correctly... If someone can let me know how to do that I can get that exported correctly.

-Justin

[ppflaum1]

graphs get created but no data. I am getting "WARNING: Result from CMD not valid. Partial Result: " for the associated graphs