Problem with update cacti

[longuele]

Hello everyone!

I can not update my server cacti (0.8.6a to 0.8.6b). On my server in addition to cacti I also plugins including wheathermap.
When I am the official procedure for updating cacti, given by this link http://www.cacti.net/downloads/docs/htm ... ndows.html, at the end I have no graph, instead of the cross as if the location of the picture was not found. I've also tabs corresponding to my plugins.

I ask myself the question is what updating cacti involves the resettlement of plugins (architecture, wheathermap, etc. ...)?

otherwise what other files to be copied into the new facility to which I have also the plug.

If we need to reinstall the plug is that it will not cause the loss of my data?

You have a link me to propose that it is updating its ties with cacti?

Please help me

[BSOD2600]

1) you should use this guide for updating cacti: http://www.cacti.net/downloads/docs/html/upgrade.html

2) Once you update cacti, you'll need to install the newer plugin architecture and then re-enable your plugins.

3) All your graph data resides in the *.rrd files. The cacti database merely contains the information about your hosts, templates, etc.

[longuele]

Hello,

Thank you for your answer, I could update cacti and plug-ins. Following a change of version RRDTOOL I curves that appear.
Now I have another problem: The curves appear without legend and some curves rrdtool me back this message ERROR: Could not parse line 'GPRINT: MAX: Maximum \: 8.2lf%% s \ n'





RRDTool Command:

c:/cacti/rrdtool.exe graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="Gi0/11 - S-3550-1-NKP-NKF2 - VLAN:|query_ifVLAN| Traffic" \
--rigid \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale-max \
--lower-limit=0 \
--vertical-label="bits per second" \
--slope-mode \
--font TITLE:12: \
--font AXIS:8: \
--font LEGEND:10: \
--font UNIT:8: \
DEF:a="d\:/WWW/cacti/rra/s35501nkpnkf2_traffic_in_2319.rrd":traffic_in:AVERAGE \
DEF:b="d\:/WWW/cacti/rra/s35501nkpnkf2_traffic_in_2319.rrd":traffic_out:AVERAGE \
CDEF:cdefa=a,8,* \
CDEF:cdefe=b,8,* \
AREA:cdefa#00CF00FF:"Inbound" \
GPRINT:cdefa:LAST:" Current\:%8.2lf %s" \
GPRINT:cdefa:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefa:MAX:"Maximum\:%8.2lf %s\n" \
LINE1:cdefe#002A97FF:"Outbound" \
GPRINT:cdefe:LAST:"Current\:%8.2lf %s" \
GPRINT:cdefe:AVERAGE:"Average\:%8.2lf %s" \
GPRINT:cdefe:MAX:"Maximum\:%8.2lf %s" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINT::MAX:"Maximum\:%8.2lf %s\n" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s" \
GPRINT::MAX:"Maximum\:%8.2lf %s\n" \
GPRINTLAST:"Current\:%8.2lf %s" \
GPRINTAVERAGE:"Average\:%8.2lf %s"
RRDTool Says:

ERROR: Could not parse line 'GPRINT::MAX:Maximum\:%8.2lf %s\n'

Thinks for help

[navjotthen]

have you defined GPRINT in your templates as a colour...