Nth Percentile Issue with Non-Traffic Data

[gmenarvino]

Hello, I have created a graph for 95th porcentile. I was able to get this working for interfaces graphs but it is not working for SAA Jitter.

Please look at the graph below:

[gandalf]

Please visit graph management and switch to debug to find the rrdtool graph statement. This is required for any help
Reinhard

[rony]

I split this from a thread in the Feature Request forum, because this is a support issue and not a feature request.

[rony]

thanks or your reply!

here is the output:
RRDTool Command:

/usr/local/bin/rrdtool graph - \
--imgformat=PNG \
--start=-86400 \
--end=-300 \
--title="UNDP_LBR_MON - SAA Jitter Average (UNDP_LBR_MON) " \
--base=1000 \
--height=120 \
--width=500 \
--alt-autoscale \
--vertical-label="ms" \
--slope-mode \
DEF:a="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumpsd:LAST \
DEF:b="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumpsd:AVERAGE \
DEF:c="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":numpsd:AVERAGE \
DEF:d="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumnsd:LAST \
DEF:e="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumnsd:AVERAGE \
DEF:f="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":numnsd:AVERAGE \
DEF:g="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumpds:LAST \
DEF:h="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumpds:AVERAGE \
DEF:i="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":numpds:AVERAGE \
DEF:j="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumnds:LAST \
DEF:ba="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":sumnds:AVERAGE \
DEF:bb="/opt/lampp/htdocs/cacti/rra/undp_lbr_mon__sum2nds_2339.rrd":numnds:AVERAGE \
CDEF:cdefb=a,c,/ \
CDEF:cdefc=b,c,/ \
CDEF:cdefg=d,f,/,-1,* \
CDEF:cdefh=e,f,/,-1,* \
CDEF:cdefbb=g,i,/ \
CDEF:cdefbc=h,i,/ \
CDEF:cdefbg=j,bb,/,-1,* \
CDEF:cdefbh=ba,bb,/,-1,* \
CDEF:cdefcc=f,f,/,-1,* \
HRULE:0#000000:"" \
AREA:cdefb#EACC00:"Jitter +SD\:" \
GPRINT:cdefc:MIN:"Minimum\:%8.2lf%s" \
GPRINT:cdefc:MAX:"Maximum\:%8.2lf%s" \
GPRINT:cdefc:AVERAGE:"Average\:%8.2lf%s" \
COMMENT:"\n" \
AREA:cdefg#EACC00:"Jitter -SD\:" \
GPRINT:cdefh:MAX:"Minimum\:%8.2lf%s" \
GPRINT:cdefh:MIN:"Maximum\:%8.2lf%s" \
GPRINT:cdefh:AVERAGE:"Average\:%8.2lf%s" \
COMMENT:" \n" \
LINE1:cdefbb#0000FF:"Jitter +DS\:" \
GPRINT:cdefbc:MIN:"Minimum\:%8.2lf%s" \
GPRINT:cdefbc:MAX:"Maximum\:%8.2lf%s" \
GPRINT:cdefbc:AVERAGE:"Average\:%8.2lf%s" \
COMMENT:" \n" \
LINE1:cdefbg#0000FF:"Jitter -DS\:" \
GPRINT:cdefbh:MAX:"Minimum\:%8.2lf%s" \
GPRINT:cdefbh:MIN:"Maximum\:%8.2lf%s" \
GPRINT:cdefbh:AVERAGE:"Average\:%8.2lf%s\n" \
COMMENT:" \n" \
HRULE:0#FF0000:"+SD 95th Percentile\: 0\n" \
HRULE:-0#FF0000:"-SD 95th Percentile\: 0"
RRDTool Says:

OK


Please let me know next step. I really appreciate your help.

Cheers,
Gaston

Moved from other post, where it should not have been.

[rony]

Please provide a screen print of the Graph Item for the Nth Percentile Comment line and Graph line in question.

[gandalf]

Please post a screenshot of the 95th graph template items
Reinhard

[gmenarvino]

Here is attached

[gmenarvino]

here is the other part...

[gmenarvino]

and here is a detailed item 22 and 23:

[gmenarvino]

Hi guys,

do you have any idea why this is happening?

i really need your help on this-

Thanks in advance.
Gaston

[gmenarvino]

Hello guys, could you please give me some feedback?

Thanks!!!!!!!!!!!!!!!

Gaston

[rony]

Do me a favor, select a smaller time frame on the graph view and post the resulting screen shot.

[gmenarvino]

Thanks for your reply!

I changed it to half an hour and attached is the screen shot.

Please let me know
Thanks!

[rony]

Um...

Is it possible for me to access the system in question? I just need web browser access. Please email me (email address in my button bar at the bottom of this post).

[gmenarvino]

I sent you a private message with the infomration.....


thanks!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!