Hello Expert,
I have application with abt 900 servers, some are windows and some are linux. I want bandwidth graph of each server.
Can i configure those 900 server on server which has cacti.
My question if i configure 900 server on one server then can it will be overloaded.
Regards
Sagar
How many server can we monitor from cacti.
Moderators: Developers, Moderators
-
sagarbirari
- Posts: 1
- Joined: Sat Apr 26, 2008 5:34 am
-
Howie
- Cacti Guru User
- Posts: 5508
- Joined: Thu Sep 16, 2004 5:53 am
- Location: United Kingdom
- Contact:
The answer is that it depends on your Cacti server 
But if all you want is bandwidth graphs, you should consider measuring the bandwidth on each switch port instead. If all your 900 servers are connected to (e.g.) 40 switches, then it should be more efficient. Cacti sends multiple queries for the same device, so the load would be less.
But if all you want is bandwidth graphs, you should consider measuring the bandwidth on each switch port instead. If all your 900 servers are connected to (e.g.) 40 switches, then it should be more efficient. Cacti sends multiple queries for the same device, so the load would be less.
Weathermap 0.98a is out! & QuickTree 1.0. Superlinks is over there now (and built-in to Cacti 1.x).
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Some Other Cacti tweaks, including strip-graphs, icons and snmp/netflow stuff.
(Let me know if you have UK DevOps or Network Ops opportunities, too!)
Who is online
Users browsing this forum: No registered users and 0 guests