Cactid and ping

[jamiebah]

I switched to cactid 'cause cmd.php was flirting with 5 minutes to complete
(it now takes under 30 seconds), now none of my ping graphs work.
There seems to be data in the database, using rrdtool info <rrdname> shows information, and the date on the file is updated like the rest, but cacti graphs show NAN.

Anyone got any ideas?

[BoarderX]

I had my graphs working properly but after adding about the 37th 48 port cisco switch i ran into the 5 min problem, obviously. So anyways I swapped over to cactid and got it running smoothly... or so I thought. Its polling about 100 switches right now. I'm receiving no errors, the files show the updated times appropriately and yet I am getting NAN results on my new graphs. The graphs that were previously working with cmd.php before i moved to cactid stopped reporting new data as well. Permissions are fine. No errors.. I'm at a bit of a loss. Sounds similar to your problem. Anyone?

I'll keep digging in the meanwhile...

[BoarderX]

Looks like I jumped the gun... It appears things are working afterall.

Its been a long day.

/sigh

[jamiebah]

Anyone have any ideas on this one? Any one?

[youngmug]

Have you done a Clear of the poller cache? This is under the Utilities section in the console. Also, run cactid manually and see if it reports back any problems.

[jamiebah]

[5] command: perl /usr/local/www/data-dist/cacti/scripts/ping.pl 10.10.1.252, output: 0.875
RRDCMD: update '/usr/local/www/data-dist/cacti/rra/cisco_router_in_server_room_ping_1668.rrd' --template ping N:0.875
[22] command: perl /usr/local/www/data-dist/cacti/scripts/ping.pl 10.13.102.1, output: 4.398
RRDCMD: update '/usr/local/www/data-dist/cacti/rra/stewart_router_ping_1467.rrd' --template ping N:4.398
[23] command: perl /usr/local/www/data-dist/cacti/scripts/ping.pl 10.11.100.1, output: 10.980
RRDCMD: update '/usr/local/www/data-dist/cacti/rra/winsted_router_ping_1471.rrd' --template ping N:10.980
[24] command: perl /usr/local/www/data-dist/cacti/scripts/ping.pl 10.12.101.1, output: 3.533
RRDCMD: update '/usr/local/www/data-dist/cacti/rra/lester_prairie_router_ping_1475.rrd' --template ping N:3.533

[jamiebah]

Yep, have cleared it more than once, I am really stumped.
Thanks for responding! I was starting to think that no one read the post lately....