Template for Catalyst 3560G and 4500

city_index · Post by **city_index** » Tue Mar 18, 2008 3:11 am

Hi Chaps,

I URGENTLY, need to monitor gig interfaces on 3560G and 4500 cisco switches. I need the templates for cacti. Please help.

Franco

Howie · Post by **Howie** » Tue Mar 18, 2008 3:17 am

Not everything needs a special template...

The standard 64-bit counter Interface Traffic template works for me on my C3560Gs. Make sure you use SNMPv2c to get 64-bit counter support.

city_index · Post by **city_index** » Tue Mar 18, 2008 3:29 am

cannot find standard 64-bit counter Interface Traffic template in cacti!!

Howie · Post by **Howie** » Tue Mar 18, 2008 3:38 am

city_index wrote:cannot find standard 64-bit counter Interface Traffic template in cacti!!

It's called SNMP - Interface Statistics. You don't have that??

You would need to create your device, fill in the details (make sure to set SNMP version to 2c or 3, make sure you configure the switch the same way), and then add it as an Associated Data Query right at the bottom of the device page.

Then Create Graphs For This Host, and you should have a list of all your switch ports. Select the ones you want to graph, and then pick the 'In/Out Bits (with 64-bit Counters)' graph template from just below the list of interfaces. Choose Create at the bottom of that screen. Done.

city_index · Post by **city_index** » Tue Mar 18, 2008 3:43 am

yes mate i have. thanks. all working now.

bigbrother · Post by **bigbrother** » Tue Apr 08, 2008 1:36 am

@ ALL

I have the same problem.

Here is what I did http://forums.cacti.net/viewtopic.php?t=26732

How do I set up step by step SNMP - Interface Statistics for a cisco switch?

thanx

bigbrother · Post by **bigbrother** » Tue Apr 08, 2008 1:57 am

@ ALL

I got it with gandalf's how to's

Cacti

Template for Catalyst 3560G and 4500

Template for Catalyst 3560G and 4500

Who is online