plugin for download/upload routers switches configuration

[StarLog]

ok will load it this week end.

[steagu]

1/ do you have PHP 4.x ? In PHP 4.x snmp V 2, 2c, 3 do not function very well and some function are missing
2/ can you try with V1 ?
3/ can you check how are the answer of your snmp request. Perhaps you become an answer in not numeric format (in linux snmp-net it 's happend). For Unix I have corrected this.
like for unix :http://forums.cacti.net/viewtopic.php?p=126587#126587. For PHP-Windows the snmp_set_oid_output_format(SNMP_OID_OUTPUT_NUMERIC) function do not exist.
try with snmp-NET:
snmpget -v 1 -c community-string IP-address .1.3.6.1.2.1.1.2.0
or
snmpget -v 1 -c community-string IP-address SysObjectID

My Cacti server died on my so I can't test everything. However, I was running PHP 5.2.5.

Can't check with V1.

With Net SNMP this is what was returned:


C:\WINDOWS\system32>snmpget -v 1 -c RWstring x.x.x.x .1.3.6.1.2.1.1.2.0

Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 1 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none)
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.324

It looks similar to what was in the unix post you referenced.

[pepj]

With Net SNMP this is what was returned:
C:\WINDOWS\system32>snmpget -v 1 -c RWstring x.x.x.x .1.3.6.1.2.1.1.2.0
Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 1 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none)
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.324
It looks similar to what was in the unix post you referenced.

Until I find a better solution could you insert in your NET-SNMP/usr/snmp/snmp.conf file
printNumericOids 1
perhaps also
printNumericEnums 1

(In windows the function snmp_set_oid_output_format(SNMP_OID_OUTPUT_NUMERIC); do not exist )

[pepj]

With Net SNMP this is what was returned:
C:\WINDOWS\system32>snmpget -v 1 -c RWstring x.x.x.x .1.3.6.1.2.1.1.2.0
Cannot find module (NOTIFICATION-LOG-MIB): At line 1 in (none)
Cannot find module (NET-SNMP-AGENT-MIB): At line 1 in (none)
Cannot find module (DISMAN-EVENT-MIB): At line 1 in (none)
SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9.1.324
It looks similar to what was in the unix post you referenced.

Until I find a better solution could you insert in your NET-SNMP/usr/snmp/snmp.conf file
printNumericOids 1
perhaps also
printNumericEnums 1

(instead to change the NET-SNMP/usr/snmp/snmp.conf --->)
have you ("steagu") already actived NET-SNMP for configmanager (in setting "use netsnmp".) ?
If yes try with this new version of the file snmpclass.php (to copy into sharednetworkclass)

[tviktor]

Hello!
I have several cisco devices and I want to download configs via scp from suse linux box. When I ran script

Code: Select all

scp user@host:running-config /tmp/1.cfg

it ask a password. So configmanager dont work.
I tried to generate rsa keys on my linux box, but I dont know, how put them on cisco device.
Help please.

[steagu]

Hi Jean Michel,

I installed your plugin on a totally different server and it worked well. i didn't have to use the new file you posted and was able to do everything with the default files. Thank you!

steve (steagu)

[StarLog]

pepj,

I have it installed as I followed your 'manual,

I want to use the PHP tftp method, I have the sharednetworkclass in plugins, and it needed to be in global.php not config.php

I see the tab in the top for upload/download, BUT, I do not see how to initiate a download from the device. nor do I see how to tell what IP and user name/ password to use to access the device.

Can you help.?

Thanks

[tviktor]

I found answer to my question
http://forums.cacti.net/viewtopic.php?p=131083#131083

I use putty's pscp under linux, and all is fine

[steagu]

Posted: Thu Apr 03, 2008 12:27 am Post subject:

--------------------------------------------------------------------------------

pepj,

I have it installed as I followed your 'manual,

I want to use the PHP tftp method, I have the sharednetworkclass in plugins, and it needed to be in global.php not config.php

I see the tab in the top for upload/download, BUT, I do not see how to initiate a download from the device. nor do I see how to tell what IP and user name/ password to use to access the device.

Can you help.?

From the "manage configs" bit, you have to click on "Add" in the top right to add your job to for the download. From there its fairly self explanatory but be sure to make it an "active rule". You'll also need to configure a Read/Write SNMP string on the device you are trying to download the config from.

[StarLog]

steagu,

Thanks, that was what I missed. Now I am closer to making it work, but I am
getting this error in the logfile, says it is not active, and I have the active checked on the configmanager. BTW, I am working with DELL layer-2 switches to try and get this working.

2008-04-03 22:31:08 Error: download. RESULT: Error: function in developpement ....... not activ.
2008-04-03 22:29:50 create pancho config for configmanager(configid=1) --> /data/configmanagerid1.conf!2008-04-03 22:30:25 create pancho config for configmanager(configid=1) --> /data/configmanagerid1.conf!2008-04-03 22:31:08 INFO: execute the upload/download configuration 1 (/data/configmanagerid1.conf) with php tftp.
2008-04-03 22:27:08 Error: download. RESULT: Error: function in developpement ....... not activ.
2008-04-03 22:27:08 INFO: execute the upload/download configuration 1 (/data/configmanagerid1.conf) with php tftp.

[StarLog]

Can someone tell me what is not active.?

2008-04-05 00:47:08 Error: download. RESULT: Error: function in developpement ....... not activ.

2008-04-05 00:47:08 INFO: execute the upload/download configuration 1 (/data/configmanagerid1.conf) with php tftp.

[steagu]

Hi Starlog,

From your Cacti "Main menu" choose Settings then the "Up/Download Config Manager" tab. Do a print screen and post it here. Did you make any modifications from the default? On my setup, I modified the IP of the TFTP server and then modified the default SNMP parameters.


Also do a print screen of the settings under "manage configs". On that one as well I just modified the TFTP server and the SNMP stuff.

Do you have any other plugins running? Are they working fine?

[pepj]

Can someone tell me what is not active.?
2008-04-05 00:47:08 Error: download. RESULT: Error: function in developpement ....... not activ.
2008-04-05 00:47:08 INFO: execute the upload/download configuration 1 (/data/configmanagerid1.conf) with php tftp.

1/ are you using NET-SNMP ?
2/ One reason for "in developpement " could be the result of the "sysObjectID" for the MIB-SNMP.
Therefore could you copy and unzip this example-file under sharednetwork, execute it and give me the results?

for example like:

Code: Select all

php D:\Programme\Cacti-NetworkMonitoring\plugins\sharednetworkclass\example9_check_snmp_networkclass.php  -i=IP-address -c=community-string 

or

Code: Select all

php D:\Programme\Cacti-NetworkMonitoring\plugins\sharednetworkclass\example9_check_snmp_networkclass.php  -i=IP-address -c=community-string -m=2 -a=D:\Programme\NET-SNMP\usr\bin

Sorry, but the maximum filesize for all my Attachments is reached. I will try to contact the Board Administrator in order to upload the file

[pepj]

Can someone tell me what is not active.?
2008-04-05 00:47:08 Error: download. RESULT: Error: function in developpement ....... not activ.
2008-04-05 00:47:08 INFO: execute the upload/download configuration 1 (/data/configmanagerid1.conf) with php tftp.

1/ are you using NET-SNMP ?
2/ One reason for "in developpement " could be the result of the "sysObjectID" for the MIB-SNMP.
Therefore could you copy and unzip this example-file under sharednetwork, execute it and give me the results?

for example like:

Code: Select all

php D:\Programme\Cacti-NetworkMonitoring\plugins\sharednetworkclass\example9_check_snmp_networkclass.php  -i=IP-address -c=community-string 

or

Code: Select all

php D:\Programme\Cacti-NetworkMonitoring\plugins\sharednetworkclass\example9_check_snmp_networkclass.php  -i=IP-address -c=community-string -m=2 -a=D:\Programme\NET-SNMP\usr\bin

Sorry, but the maximum filesize for all my Attachments is reached. I will try to contact the Board Administrator in order to upload the file

[Arrow2005]

Have anybody tryed to install this on a CactiEZ server ???

I did try, but failed. think I have tryed everything

but can´t get it to work